
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X125-50 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 125mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
The nominal 125 mm stroke remains the maximum travel, yielding a usable extend range of 75-125 mm, while the retract end stays fixed. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity. Dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures.
The G1 air port feeds the 60 mm adjustable air cushions at both ends. Note that TPU seals are not offered on this 250 mm bore; standard NBR packings handle -20 to +70 C, with a Viton H option for 0-150 C heat. This plain SKU lacks a magnet and cannot take a position sensor.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X125-50 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 125 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Drive heavy process valves where the 50 mm on-site stroke adjustment compensates for linkage variance without repositioning the cylinder body.
Execute high-force pressing tasks using the 60 mm adjustable cushions to absorb kinetic energy, fine-tuning the working stroke end on the factory floor.
The 50 mm adjustable window is ideal for fine-tuning the end position across shared spares without machining new mounts. SGCJ mounting choices include FA, LB, TC, FTC, TCM1, and TCM2. Because this is a non-magnetized SKU, it cannot accept CMSG, DMSG, or EMSG sensors; add the -S suffix for sensing capabilities. For any stroke over 500 mm, use a guide rail to prevent side-load wear.
AirtacDistr lists every SGCJ250 order code with its price on one page at https://airtacdistr.com/products/airtac-sgcj250-adjustable-double-rod-cylinder
Quick checklist
The air port is G1.
The external adjuster lets you shorten the extend stroke by up to 50 mm on-site, giving a usable extend range of 75-125 mm from the 125 mm nominal maximum. The retract end is fixed. This stop sets the end position but does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.