
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X225-50 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 225mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
Delivering massive thrust in a large-bore package, this ISO 15552 tie-rod cylinder pushes with 24543 N at 0.5 MPa. Four steel tie rods clamp the aluminum barrel to the covers, and the G1 port handles the high air volume needed for the 250 mm bore. The external adjuster lets you shorten the extend stroke on-site by up to 50 mm, giving a usable range of 175 to 225 mm without changing the cylinder itself.
Because the nominal 225 mm stroke is the maximum, you can fine-tune the end position during machine commissioning. Note that TPU seals are not offered on this bore; it uses NBR instead, with a Viton H option for 0 to 150 C environments.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X225-50 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Drives large platens to compress pallets, using the 50 mm adjuster to dial in the exact 175 mm end position for varying load heights.
Opens large hopper gates in material handling, where the on-site stroke tuning compensates for mechanical linkage variances.
This 250 mm bore sits at the top of the SGCJ range, pushing 24543 N at 0.5 MPa. Stepping down, the 200 mm bore yields 15708 N, while this unit pulls 23562 N. The adjustable stroke is ideal when you need to share a spare cylinder across slightly different stroke variants or fine-tune the extend end position on-site. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because this is a non-magnet SKU, it cannot take a CMSG or DMSG sensor; you need the -S variant for position detection. For any stroke over 500 mm, use a guide rail to prevent side-load damage.
AirtacDistr lists every SGCJ250 order code with its price on one page at https://airtacdistr.com/products/airtac-sgcj250-adjustable-double-rod-cylinder
Quick checklist
At 0.5 MPa it pushes 24543 N and pulls 23562 N. At 0.7 MPa it pushes 34360 N and pulls 32986 N. The theoretical maximum force is 5006 kgf at 1.0 MPa. This 250 mm bore cylinder uses a G1 air port.
An external stop screw lets you shorten the extend stroke by up to 50 mm on-site. The usable extend range is 175 to 225 mm, with 225 mm being the maximum. The retract end is fixed. This stop only sets the end position; it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.