
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X550-30S is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 550mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
The external adjuster allows you to shorten the extend stroke on-site by up to 30 mm, yielding a usable range of 520 to 550 mm without changing the cylinder itself. A G1 port handles the air supply, while four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity.
The built-in piston magnet supports CMSG, DMSG, and EMSG switches for precise position detection. Because this is a 250 mm bore, TPU seals are unavailable, but NBR packing handles standard -20 to +70 C environments, with a Viton H option for 0-150 C heat. Note that the 60 mm adjustable air cushions only decelerate the piston near the end caps; they do not hold the load on air loss, so use an external rod lock or pilot-operated check valve for static holding.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X550-30S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 550 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Acts as a heavy-duty physical stop mechanism for AGVs, where the G1 port and tie-rod rigidity endure repeated high-mass impacts in busy logistics hubs.
The 30 mm adjustable window is highly useful for synchronizing end positions across multiple fixtures or sharing spares across stroke variants, as you can fine-tune the extend stop on-site. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets, all conforming to ISO 15552 mounting-interface dimensions. The -S suffix confirms the magnet is present for sensors. Because the 550 mm stroke is relatively long for a large-bore actuator, ensure adequate rod-end support and external guiding to prevent side-load bending.
AirtacDistr lists every SGCJ250 order code with its price on one page at https://airtacdistr.com/products/airtac-sgcj250-adjustable-double-rod-cylinder
Quick checklist
This 250 mm bore cylinder features a G1 air port and a 50 mm rod.
The external adjuster lets you shorten the extend stroke on-site by up to 30 mm. The nominal 550 mm stroke is the maximum, giving a usable extend range of 520 to 550 mm, while the retract end remains fixed. This mechanism sets the end position and is not a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.