This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI100X762.5S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SI100 Standard Cylinder SI100X762.5S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 763mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI100X762.5S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SI100X762.5S is a discontinued double-acting ISO 15552 profile cylinder with a 100mm bore, delivering 3927 N push force at 0.5 MPa via a G1/2 port. The direct replacement is the SAI100X762.5S, sharing identical mounting, stroke, and output force.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. The SAI family also adds SAIL, SAIF, and BSAI lock variants the SI lacked.
| Model | Airtac SI100 Standard Cylinder SI100X762.5S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI100X762.5S |
| Bore size | Ø100 mm |
| Stroke | 763 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI100X762.5S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAI100X762.5S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×763 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Secures large metal castings in machining fixtures, utilizing the 3927 N push force at 0.5 MPa to hold components rigidly against cutting loads.
Actuates a 762.5mm stroke diverter gate on a heavy-duty packaging line, requiring an external guide to prevent rod bending during lateral pallet shifts.
To replace this SI100X762.5S, order the SAI100X762.5S. Verify the ISO 15552 interface, 100mm bore, 762.5mm stroke, G1/2 port, M20x1.5 rod thread, and the -S magnet for CS1-B/DS1-B switches (the SAI uses current AirTAC switches). If you need more force than the 3927 N at 0.5 MPa, step up to a 125mm bore; if less, an 80mm bore provides 2513 N. Because this is a 762.5mm long stroke, use an external guide to prevent rod bending and side-load damage. For load holding on air loss, note that the cushion only decelerates; you must add an external rod lock, pilot check valve, or use the SAIL/BSAI lock variant.
Replacement checklist
Yes, the SI100X762.5S is discontinued. The direct replacement is the AirTAC SAI100X762.5S. It is dimensionally interchangeable per ISO 15552, matching the 100mm bore, 762.5mm stroke, G1/2 port, and mounting hardware.
It features a G1/2 air port and provides 3927 N push / 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, 7068 N push at 0.9 MPa, and a theoretical maximum force of 801 kgf at 1.0 MPa.
Send us the quantity and destination. We confirm price, availability and lead time on the SAI100X762.5S replacement — usually within 7 hours.