verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X125-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

AirTAC SI Series · Discontinued ISO 15552 Cylinder

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 125mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X125-50S, which matches its ISO interface, bore, stroke, force and mounting.

  • BoreØ160 mm
  • Stroke125 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2.0
  • StatusDiscontinued → SAIJ160X125-50S
$403.82 $411.32Save 1% Ships as SAIJ160X125-50S (current AirTAC replacement)
Ships as SAIJ160X125-50S, the current AirTAC direct replacement (same bore, stroke, force, port and mounting). Order this code as usual. Your cart, checkout and order confirmation will show the SAIJ160X125-50S we ship. View SAIJ160X125-50S
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SIJ160 stroke, stroke adjustment and mounting/version on one page All SIJ160 codes →
verified Genuine AirTAC sync_alt Direct SAI upgrade bolt Reply in 7 h

About the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S

The AirTAC SIJ160X125-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 160 mm bore and 125 mm nominal stroke. An external stop screw lets you trim the extend stroke by up to 50 mm on-site, yielding a usable 75-125 mm window. The direct replacement is the SAIJ160X125-50S, matching the interface, bore, force, and mounting.

The SAIJ successor retains the dimensions but adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches. Remember the stop screw sets end position only; it is not a load lock.

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S Technical Specifications

ModelAirtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S
SeriesSI ISO 15552 profile cylinder (discontinued)
ReplacementSAIJ160X125-50S
Bore sizeØ160 mm
Stroke125 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X125-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.

Theoretical Output Force (Ø160mm)

PressurePush forcePull force
0.5 MPa10053 N9425 N
0.7 MPa14074 N—
Max (@1.0 MPa)2050 kgf

The SAIJ160X125-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S

SIISO 15552 profile-barrel cylinder (discontinued).
160Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).

Where the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S Is Used

warehouse

Pallet Positioning Stops

Act as a robust 160 mm bore end-stop in high-mass conveyors, trimming the extend length to accommodate varying pallet depths without changing the cylinder.

straighten

Large Assembly Pinning

Drive heavy mechanical pins using the 9425 N pull force, relying on the 50 mm adjustable cushion to decelerate the 40 mm rod smoothly before impact.

Replacing the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S with the SAIJ160X125-50S

To replace the discontinued SIJ160X125-50S, order the exact direct replacement SAIJ160X125-50S, which preserves the 50 mm adjust window, G3/4 port, and M36x2 rod thread. Choose the 50 mm adjust window if your application needs field stroke tuning between 75 and 125 mm. Mounting hardware (Basic, FA, LB, TC) reuses the ISO 15552 interface. The -S magnet supports legacy CS1-B/DS1-B sensors. For stroke lengths over 300 mm, verify side-load limits to prevent guide wear. Because the stop screw is not a lock, use SAIL/BSAI or an external rod lock for held loads.

AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder

Replacement checklist

  • ✓ Same ISO 15552 interface → SAIJ160X125-50S
  • ✓ Same bore / stroke / force
  • ✓ Port/thread type (PT/G/NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Ask an Engineer

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X125-50S FAQ

Yes, the SIJ160X125-50S is discontinued. The direct replacement is the SAIJ160X125-50S. It shares the identical ISO 15552 interface, 160 mm bore, 125 mm stroke, 50 mm adjust window, G3/4 port, and mounting options, but features an upgraded piston seal.

The external stop screw provides a 50 mm adjust window, allowing you to shorten the 125 mm extend stroke down to 75 mm. The stop sets end position and is not a load lock.

Related AirTAC SAI Cylinders

Request a Quote for the SAIJ160X125-50S

Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X125-50S replacement — usually within 7 hours.

Thank you. We received your request for SIJ160X125-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.