This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X160-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X160-50 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X160-50, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X160-50 is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. Its external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 110-160 mm forward travel out of the 160 mm nominal maximum. It features a 40 mm rod, M36x2 thread, and a G3/4 port.
The direct replacement is the SAIJ160X160-50, preserving the ISO 15552 mounting interface, force, and adjust window. The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. Note: this SKU lacks a magnet (-S), so it cannot accept a magnetic switch. The stop screw sets end position only; it is not a load lock.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X160-50 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X160-50 |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X160-50 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X160-50 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Allows on-site extend stroke trimming up to 50 mm to dial in exact press-fit depths for large 160 mm bore assemblies without machining hard stops.
Sets precise end positions for heavy load push-off stations, trimming the 160 mm stroke to match varying pallet widths on the fly.
Provides adjustable forward end-positioning for large industrial mold closing or heavy clamping where 50 mm of field stroke tuning accommodates profile variations.
To replace the discontinued SIJ160X160-50, order the direct replacement SAIJ160X160-50, which matches the ISO 15552 interface, 160 mm bore, 160 mm stroke, 50 mm adjust window, and G3/4 port. Choose the 50 mm adjust window if your final end-position needs on-site tuning between 110 and 160 mm. Mounting attachments (FA, LB, TC) are reusable. Because this SKU has no -S magnet, it cannot support legacy CS1-B/DS1-B sensors. For strokes at or above 300 mm, verify side-load limits to prevent guide wear. Remember the stop screw is not a lock; for held loads use SAIL/BSAI or an external rod lock.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X160-50 is discontinued. The direct replacement is the SAIJ160X160-50, offering the same ISO 15552 interface, 160 mm bore, 160 mm stroke, 50 mm adjust window, and G3/4 port. The SAIJ family also uses an upgraded two Y-shaped one-way piston seal for longer life.
The external stop screw provides a 50 mm adjust window, allowing you to trim the extend stroke from 160 mm down to 110 mm on-site. The stop sets end position only; it is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X160-50 replacement — usually within 7 hours.