This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X160-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X160-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X160-50S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X160-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 160 mm bore and a built-in piston magnet. An external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 110-160 mm extension window from the 160 mm nominal maximum.
Because the SIJ family is end-of-life, the direct replacement is the SAIJ160X160-50S, retaining the same ISO 15552 mounting interface, bore, stroke, adjust window, and force. The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. The external stop screw sets the end position but is not a load lock; for held loads use an external rod lock or the SAIL/BSAI variants.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X160-50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X160-50S |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X160-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X160-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Requires field stroke tuning to set precise 110-160 mm pressing depths on varying workpieces without swapping cylinders.
Needs adjustable end positions to accommodate different pallet heights, using the 50 mm extend trim to dial in exact stopping points.
Demands on-site stroke shortening to safely close molds of varying heights, relying on the 160 mm bore for high clamping force.
To replace the discontinued SIJ160X160-50S, order the direct replacement SAIJ160X160-50S, which preserves the 160 mm bore, 160 mm nominal stroke, 50 mm adjust window, G3/4 port, and ISO 15552 mounting. Choose the 50 mm adjust window when your extend stroke needs on-site tuning between 110 and 160 mm. Mounting options include Basic, FA, LB, and TC. The -S suffix means a piston magnet is present for legacy CS1-B/DS1-B switches. For strokes of 300 mm or longer, verify side-load limits to prevent rod binding.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X160-50S is discontinued. The direct replacement is the SAIJ160X160-50S, which shares the same ISO 15552 interface, 160 mm bore, 160 mm stroke, 50 mm adjust window, G3/4 port, and mounting. The SAIJ features an upgraded two Y-shaped one-way piston seal for longer life.
The external stop screw provides a 50 mm adjust window, allowing you to trim the extend stroke from 160 mm down to 110 mm on-site. The stop sets end position and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X160-50S replacement — usually within 7 hours.