verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X200-50SH, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

AirTAC SI Series · Discontinued ISO 15552 Cylinder

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X200-50SH, which matches its ISO interface, bore, stroke, force and mounting.

  • BoreØ160 mm
  • Stroke200 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2.0
  • StatusDiscontinued → SAIJ160X200-50SH
$508.51 $516.01Save 1% Ships as SAIJ160X200-50SH (current AirTAC replacement)
Ships as SAIJ160X200-50SH, the current AirTAC direct replacement (same bore, stroke, force, port and mounting). Order this code as usual. Your cart, checkout and order confirmation will show the SAIJ160X200-50SH we ship. View SAIJ160X200-50SH
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SIJ160 stroke, stroke adjustment and mounting/version on one page All SIJ160 codes →
verified Genuine AirTAC sync_alt Direct SAI upgrade bolt Reply in 7 h

About the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH

The AirTAC SIJ160X200-50SH is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 150-200 mm extension out of the 200 mm nominal maximum. The -H designation specifies a Viton/FKM seal for 0-150 C high-temperature environments, while the -S denotes a piston magnet for legacy CS1-B/DS1-B sensors.

As this model is end-of-life, the direct replacement is the SAIJ160X200-50SH, retaining the same ISO 15552 mounting interface, force, and adjustability. The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. Remember the stop screw sets the end position but is not a load lock; use an external rod lock or SAIL/BSAI variant for held loads.

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH Technical Specifications

ModelAirtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH
SeriesSI ISO 15552 profile cylinder (discontinued)
ReplacementSAIJ160X200-50SH
Bore sizeØ160 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X200-50SH carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.

Theoretical Output Force (Ø160mm)

PressurePush forcePull force
0.5 MPa10053 N9425 N
0.7 MPa14074 N—
Max (@1.0 MPa)2050 kgf

The SAIJ160X200-50SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH

SIISO 15552 profile-barrel cylinder (discontinued).
160Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).

Where the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH Is Used

precision_manufacturing

High-Temperature Press Tending

Utilizing the -H Viton seal for 0-150 C environments, this cylinder actuates press doors where the 50 mm stroke adjust compensates for varying die thicknesses on-site.

warehouse

Pallet Stopper Adjustment

Acts as a robust pallet stop in high-throughput lines; operators trim the extend stroke by up to 50 mm to accommodate mixed pallet dimensions while relying on the 50 mm cushion to decelerate loads.

Replacing the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH with the SAIJ160X200-50SH

To replace the discontinued SIJ160X200-50SH, specify the SAIJ160X200-50SH, which matches the 160 mm bore, 200 mm stroke, 50 mm adjust window, G3/4 port, and ISO 15552 mounting. The 50 mm adjust window is ideal if your end position requires on-site tuning between 150 mm and 200 mm. Mounting options include Basic, FA, LB, and TC. The -S magnet supports legacy CS1-B/DS1-B switches (current AirTAC switches are used on the SAIJ). For strokes >=300 mm, verify side-load limits to prevent guide wear. The -H Viton seal allows 0-150 C operation.

AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder

Replacement checklist

  • ✓ Same ISO 15552 interface → SAIJ160X200-50SH
  • ✓ Same bore / stroke / force
  • ✓ Port/thread type (PT/G/NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Ask an Engineer

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X200-50SH FAQ

Yes, the SIJ160X200-50SH is discontinued. The direct replacement is the SAIJ160X200-50SH. It shares the identical ISO 15552 interface, 160 mm bore, 200 mm stroke, 50 mm adjust window, G3/4 port, and mounting options. The SAIJ upgrade features a two Y-shaped one-way piston seal for longer life and lower start-up pressure.

The external stop screw window is 50 mm, allowing you to shorten the 200 mm nominal extend stroke down to 150 mm on-site. The stop sets end position but is not a load lock; use an external rod lock for held loads.

Related AirTAC SAI Cylinders

Request a Quote for the SAIJ160X200-50SH

Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X200-50SH replacement — usually within 7 hours.

Thank you. We received your request for SIJ160X200-50SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.