verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X225-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

AirTAC SI Series · Discontinued ISO 15552 Cylinder

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 225mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X225-50, which matches its ISO interface, bore, stroke, force and mounting.

  • BoreØ160 mm
  • Stroke225 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2.0
  • StatusDiscontinued → SAIJ160X225-50
$446.42 $453.92Save 1% Ships as SAIJ160X225-50 (current AirTAC replacement)
Ships as SAIJ160X225-50, the current AirTAC direct replacement (same bore, stroke, force, port and mounting). Order this code as usual. Your cart, checkout and order confirmation will show the SAIJ160X225-50 we ship. View SAIJ160X225-50
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SIJ160 stroke, stroke adjustment and mounting/version on one page All SIJ160 codes →
verified Genuine AirTAC sync_alt Direct SAI upgrade bolt Reply in 7 h

About the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50

The AirTAC SIJ160X225-50 is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 50 mm on-site, yielding a usable 175-225 mm range from the 225 mm nominal maximum. Because this SKU lacks a -S magnet, it cannot accept a magnetic switch.

The direct replacement is the SAIJ160X225-50, preserving the interface, force, and mounting. The SAIJ upgrade introduces a two-piece Y-shaped piston seal for lower start-up pressure and longer life. Remember the stop screw sets end position only; it is not a lock, and a plain cylinder drifts on air loss.

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50 Technical Specifications

ModelAirtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50
SeriesSI ISO 15552 profile cylinder (discontinued)
ReplacementSAIJ160X225-50
Bore sizeØ160 mm
Stroke225 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X225-50 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.

Theoretical Output Force (Ø160mm)

PressurePush forcePull force
0.5 MPa10053 N9425 N
0.7 MPa14074 N—
Max (@1.0 MPa)2050 kgf

The SAIJ160X225-50 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50

SIISO 15552 profile-barrel cylinder (discontinued).
160Bore size in mm.
×225Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).

Where the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50 Is Used

vertical_align_bottom

Variable Height Spotting

Trim the extend stroke from 225 mm down to 175 mm to accommodate varying workpiece heights in a clamping station without re-engineering the fixture.

warehouse

Pallet Positioning Stops

Use the external stop screw to dial in the exact end position for heavy pallets, ensuring consistent placement while the 50 mm cushion decelerates the load.

Replacing the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50 with the SAIJ160X225-50

To replace the discontinued SIJ160X225-50, order the SAIJ160X225-50 direct: it keeps the 225 mm stroke, 50 mm adjust window, 160 mm bore, and G3/4 port. Size both ways using 0.5 MPa push force: step down to a 125 mm bore for 6136 N, or up to a 200 mm bore for 15708 N. Reuse existing FA, LB, or TC ISO 15552 mounts. Choose the -50 mm adjust window if your end-stop needs field tuning between 175 and 225 mm. This non-magnetic SKU cannot take a sensor; for position feedback, select the -S magnet option and legacy CS1-B/DS1-B switches. For stroke lengths over 300 mm, verify side-load guidance to prevent rod binding. Never rely on the stop screw or air cushion for load holding; use an external rod lock or SAIL/BSAI variant.

AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder

Replacement checklist

  • ✓ Same ISO 15552 interface → SAIJ160X225-50
  • ✓ Same bore / stroke / force
  • ✓ Port/thread type (PT/G/NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Ask an Engineer

Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50 FAQ

Yes, the SIJ160X225-50 is discontinued. The direct replacement is the SAIJ160X225-50, which matches the ISO 15552 interface, 225 mm stroke, 50 mm adjust window, and G3/4 port. The SAIJ family also adds an upgraded two-piece Y-shaped piston seal for longer life.

The external stop screw shortens the extend stroke by up to 50 mm, giving a usable range of 175-225 mm. The stop sets position only; it is not a load lock.

Related AirTAC SAI Cylinders

Request a Quote for the SAIJ160X225-50

Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X225-50 replacement — usually within 7 hours.

Thank you. We received your request for SIJ160X225-50 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.