This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X225-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 225mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X225-50S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X225-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 160mm bore and 225mm nominal stroke. An external stop screw lets you trim the extend stroke by up to 50mm on-site, yielding a usable 175-225mm window. The direct replacement is the SAIJ160X225-50S, sharing the same interface, force, and mounting.
The SAIJ successor introduces an upgraded piston seal using two Y-shaped one-way elements for lower start-up pressure and longer life. The stop screw sets the end position but is not a load lock; use an external rod lock or SAIL/BSAI variant for held loads.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X225-50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X225-50S |
| Bore size | Ø160 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X225-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X225-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Allows operators to dial in the exact 175-225mm extend position on-site for pressing bearings without machining custom spacers.
Adjusts the extend stop to route different package sizes on a sorting line, providing precise reach without reprogramming valves.
Sets a hard mechanical end position for pallets of varying heights, trimming the stroke by up to 50mm to match the load profile.
To replace the discontinued SIJ160X225-50S, order the direct replacement SAIJ160X225-50S, retaining the ISO 15552 mounting interface and G3/4 port. Choose the 50mm adjust window if your end-position tuning requires on-site stroke reduction from the 225mm maximum. Mounting options include FA, LB, and TC. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches. For strokes of 300mm or longer, verify side-load guidance to prevent rod wear.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X225-50S is discontinued. The direct replacement is the SAIJ160X225-50S, which maintains the same ISO 15552 interface, 160mm bore, 225mm stroke, 50mm adjust window, and G3/4 port.
The external stop screw provides a 50mm adjust window, allowing the 225mm extend stroke to be shortened to 175mm on-site.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X225-50S replacement — usually within 7 hours.