This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X250-50SH, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X250-50SH is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 250mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X250-50SH, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X250-50SH is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. Its external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 200-250 mm window from the 250 mm nominal maximum. The direct replacement is the SAIJ160X250-50SH, matching the interface, force, and adjust window.
The -H Viton seal extends operating temperature to 0-150 C. The -S magnet supports legacy CS1-B/DS1-B switches. The SAIJ upgrade uses an upgraded two Y-shaped one-way piston seal for low start-up pressure. The stop sets end position, not a lock; use SAIL or BSAI for load holding.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X250-50SH |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X250-50SH |
| Bore size | Ø160 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X250-50SH carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X250-50SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Trimming the extend stroke on-site by up to 50 mm to set precise pressing depth in a 150 C thermal forming press, leveraging the Viton -H seal.
Adjusting the extend endpoint in the field without changing the cylinder mount to accommodate varying pallet sizes, relying on the 50 mm trim window.
To replace the discontinued SIJ160X250-50SH, use the SAIJ160X250-50SH direct. Choose the 50 mm adjust window if you need on-site extend tuning from 200-250 mm. Mounting interfaces (Basic, FA, LB, TC) reuse existing ISO 15552 fixtures. The -S magnet enables position sensing. For strokes >=300 mm, verify side-load guidance to prevent rod binding.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X250-50SH is discontinued. The direct replacement is the SAIJ160X250-50SH. It shares the same ISO 15552 interface, 160 mm bore, 250 mm stroke, 50 mm adjust window, G3/4 port, and mounting options, but features an upgraded piston seal.
The external stop screw allows trimming the extend stroke by up to 50 mm on-site (usable 200-250 mm). The stop sets end position only; it is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X250-50SH replacement — usually within 7 hours.