This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X275-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X275-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 275mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X275-50S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X275-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 160mm bore and 275mm maximum stroke. Its external stop screw lets you trim the extend stroke by up to 50mm on-site, giving a usable 225-275mm end position. The direct replacement is the SAIJ160X275-50S, matching the interface, force, and mounting.
The SAIJ upgrade uses an upgraded two Y-shaped one-way piston seal for low start-up pressure and long life. The stop screw sets end position but is not a load lock; use SAIL or BSAI for held loads. The -S suffix provides a piston magnet for CS1-B/DS1-B switches.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X275-50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X275-50S |
| Bore size | Ø160 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X275-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X275-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Requires adjustable end positions to accommodate varying pallet depths on-site, trimming the extend stroke by up to 50mm without changing mounts.
Demands field stroke tuning to alter the divert angle precisely, relying on the 160mm bore's 9425N pull force at 0.5MPa to retract heavy gates.
To replace the SIJ160X275-50S, order SAIJ160X275-50S directly. The 50mm adjust window allows precise 225-275mm extend tuning, beating a fixed SAI with an external stop by integrating the mechanism. Mounting reuses ISO 15552 interfaces like FA, LB, or TC. The -S magnet enables legacy CS1-B/DS1-B sensors. For this 275mm stroke, ensure correct guide alignment to prevent side-load wear.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X275-50S is discontinued. The direct replacement is the SAIJ160X275-50S, offering the same ISO 15552 interface, 160mm bore, 275mm stroke, 50mm adjust window, G3/4 port, and mounting compatibility.
The external stop screw window is 50mm, allowing a usable extend stroke of 225-275mm. The stop sets end position and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X275-50S replacement — usually within 7 hours.