This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X300-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X300-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X300-50S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X300-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. Its external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 250-300 mm window from the 300 mm nominal maximum. It features a 40 mm rod, M36x2 thread, 50 mm adjustable cushions, and a G3/4 port. The direct replacement is the SAIJ160X300-50S, sharing the same interface, force, and mounting.
Because the stop screw only sets the end position, it is not a load lock; the piston drifts on air loss, so use an external rod lock or SAIL/BSAI variant for held loads. The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. This -S model includes a piston magnet for legacy CS1-B/DS1-B switches.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X300-50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X300-50S |
| Bore size | Ø160 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X300-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X300-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Final press-down position requires field adjustment to crush or form components precisely; the 50 mm stop window trims the 300 mm extend stroke without swapping cylinders.
Acting as a heavy-duty stop for varying pallet sizes on a line, the external screw allows 50 mm of on-site repositioning to accommodate different package lengths.
Indexing large loads to a specific height where the exact target varies by batch; the adjustable end-position stops the 160 mm bore precisely at the required 250-300 mm mark.
To replace the discontinued SIJ160X300-50S, order the exact direct replacement SAIJ160X300-50S, keeping the 300 mm nominal stroke, 50 mm adjust window, and -S magnet. The adjust screw lets you tune the extend end-position on-site; remember it sets position but does not lock the load. Reuse your existing ISO 15552 FA, LB, or TC mounts. For the 300 mm stroke, verify side-load limits and use external guides to prevent rod bending. The G3/4 port and 50 mm cushions remain unchanged.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X300-50S is discontinued. The direct replacement is the SAIJ160X300-50S. It shares the same ISO 15552 interface, 160 mm bore, 300 mm stroke, 50 mm adjust window, G3/4 port, and mounting options. The SAIJ family also adds an upgraded two Y-shaped one-way piston seal for longer life.
The external stop screw offers a 50 mm adjustment window, allowing the extend stroke to be shortened from 300 mm down to 250 mm on-site. The stop sets end position and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X300-50S replacement — usually within 7 hours.