This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X500-50TC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X500-50TC is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 500mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X500-50TC, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X500-50TC is a double-acting double-rod ISO 15552 adjustable-stroke cylinder, now discontinued and replaced by the SAIJ160X500-50TC. The external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 450-500 mm window. The SAIJ direct keeps the G3/4 port, M36x2 rod thread, TC mount, and 50 mm cushions. The stop sets end position but is not a load lock.
The SAIJ successor uses an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. This non-magnetic SKU cannot take a switch. At 500 mm stroke, use external guides to prevent rod bending. For held loads, use SAIL or BSAI lock variants.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X500-50TC |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X500-50TC |
| Bore size | Ø160 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X500-50TC carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X500-50TC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Leverage the TC trunnion mount to swing a heavy diverter gate, trimming the 500 mm extend stroke by up to 50 mm to set the exact open angle.
Halt large pallets on a chain line using the 9425 N pull force, adjusting the stop block position within the 450-500 mm window without machining.
Choose the 50 mm adjust window when you need on-site end-position tuning between 450 and 500 mm. The TC mount provides a trunnion interface for pivoting. Because this SKU lacks the -S suffix, it cannot accept a magnetic switch; add external sensing if needed. At 500 mm stroke, support the load with external guides to manage side-load and rod-bending forces. The stop screw sets end position only; it is not a lock, so use an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X500-50TC is discontinued. The direct replacement is the SAIJ160X500-50TC, which shares the same ISO 15552 interface, 160 mm bore, 500 mm stroke, 50 mm adjust window, G3/4 port, and TC mounting.
The external stop screw window is 50 mm, allowing you to trim the extend stroke from 500 mm down to 450 mm on-site. The stop sets end position and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X500-50TC replacement — usually within 7 hours.