This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X550-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X550-50 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 550mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X550-50, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X550-50 is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable 500-550 mm stroke (550 mm nominal max). The direct replacement is the SAIJ160X550-50, matching the bore, force, adjust window, and mounting.
The SAIJ successor introduces an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. Note this non-magnetic SKU cannot accept a switch. The stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X550-50 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X550-50 |
| Bore size | Ø160 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X550-50 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X550-50 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Trimming the extend stroke by up to 50 mm on-site allows precise bottoming-out height calibration for large 160 mm bore pressing tasks without machining custom spacers.
Adjusting the end position on-site lets operators fine-tune the stopping distance for different pallet depths, relying on the external stop screw to set the exact 500-550 mm extend limit.
To replace the discontinued SIJ160X550-50, order the direct replacement SAIJ160X550-50, which reuses the exact ISO 15552 mounting interface (Basic, FA, LB, TC). Choose the 50 mm adjust window if your end-position tuning requires trimming the 550 mm extend stroke down to 500 mm on-site. Because this SKU lacks the -S magnet, it cannot accept legacy CS1-B/DS1-B sensors. At 550 mm stroke, minimize side-load and rod-bending by supporting the load with external guides. The stop screw sets end position but is not a lock; for load holding on air loss, specify a SAIL or BSAI lock variant or an external rod lock.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X550-50 is discontinued. The direct replacement is the SAIJ160X550-50. It shares the same ISO 15552 interface, 160 mm bore, 550 mm stroke, 50 mm adjust window, G3/4 port, and mounting options. The SAIJ family also adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life.
The external stop screw provides a 50 mm adjust window, allowing you to shorten the 550 mm extend stroke down to 500 mm on-site. The stop sets end position only and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X550-50 replacement — usually within 7 hours.