This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X600-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X600-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X600-50S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X600-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 50 mm on-site, yielding a usable 550-600 mm extension from the 600 mm nominal maximum. It features a 40 mm rod, M36x2 thread, 50 mm adjustable cushions, G3/4 port, and a -S piston magnet.
The direct replacement is the SAIJ160X600-50S, retaining the same ISO 15552 mounting interface, bore, stroke, adjust window, and force. The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. Note the stop screw sets end position only; it is not a load lock, so use an external rod lock or SAIL/BSAI variant for held loads.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X600-50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X600-50S |
| Bore size | Ø160 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X600-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X600-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Divert large loads along a conveyor at 30-500 mm/s, adjusting the actuator's reach by up to 50 mm in the field to accommodate varying pallet widths without changing the cylinder.
To replace the discontinued SIJ160X600-50S, specify SAIJ160X600-50S directly—it is a direct swap preserving the ISO 15552 dimensions, G3/4 port, 50 mm adjust window, and -S magnet. Choose the 50 mm adjust window if your application requires field tuning of the extend stroke within the 550-600 mm range. Mounting options include Basic, FA, LB, and TC. The -S suffix ensures compatibility with legacy CS1-B/DS1-B switches. Because the 600 mm stroke is long, carefully manage side loads and rod bending by using external guides to prevent premature wear.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X600-50S is discontinued. The direct replacement is the SAIJ160X600-50S, which shares the identical ISO 15552 interface, 160 mm bore, 600 mm stroke, 50 mm adjust window, G3/4 port, and -S magnet. The SAIJ family also features an upgraded two Y-shaped one-way piston seal for longer life.
The external stop screw window is 50 mm, allowing you to shorten the extend stroke from the 600 mm maximum down to 550 mm. The stop sets end position only and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X600-50S replacement — usually within 7 hours.