This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X900-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X900-50 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 900mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X900-50, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X900-50 is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 900 mm nominal stroke and a 50 mm external stop screw window, allowing you to trim the extend stroke down to 850 mm on-site. The direct replacement is the SAIJ160X900-50, matching the interface, force, and mounting.
The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. The stop screw sets end position but is not a load lock; use SAIL or BSAI for held loads. This non-magnet SKU cannot take a switch.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X900-50 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X900-50 |
| Bore size | Ø160 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X900-50 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X900-50 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Actuate a large-format palletizing arm where the extend stroke must be trimmed on-site by up to 50 mm to clear variable pallet heights, relying on external guides for the 900 mm length.
Reuse ISO 15552 FA, LB, or TC mounts. Because this is a non-magnet SKU (no -S), it cannot support a magnetic switch. For the 900 mm stroke, use external guides to prevent rod bending and side-load damage.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X900-50 is discontinued. The direct replacement is the SAIJ160X900-50, which matches the ISO 15552 interface, 160 mm bore, 900 mm stroke, 50 mm adjust window, and G3/4 port. The SAIJ family also adds an upgraded two Y-shaped one-way piston seal for longer life.
The external stop screw provides a 50 mm adjust window, allowing the extend stroke to be shortened from 900 mm to 850 mm on-site. The stop sets end position and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X900-50 replacement — usually within 7 hours.