This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ80X50-30FA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ80 Dual Axis Adjustable Cylinder SIJ80X50-30FA is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 50mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ80X50-30FA, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ80X50-30FA is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 30 mm on-site, giving a usable 20-50 mm stroke from the 50 mm nominal maximum. The direct replacement is the SAIJ80X50-30FA, matching the interface, force, and FA mounting.
The SAIJ upgrade utilizes an improved two-piece Y-shaped piston seal for lower start-up pressure and longer life. The stop screw sets the end position but is not a load lock; use SAIL or BSAI for held loads. This non-S SKU lacks a magnet and cannot take a switch.
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X50-30FA |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X50-30FA |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X50-30FA carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X50-30FA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Light-duty press operations needing precise 20-50 mm extend endpoints dialed in on-site via the 30 mm stop screw window.
Sealing heads requiring exact extend positioning; the 30 mm trim window allows rapid changes between box heights.
To replace the discontinued SIJ80X50-30FA, order the direct replacement SAIJ80X50-30FA. The 30 mm adjust window is ideal when exact extend endpoints require field tuning. The FA foot mount is included, with LB and TC options available. Because this SKU lacks the -S magnet, it cannot accept legacy CS1-B/DS1-B sensors. The external stop sets end position but is not a lock; for load holding without live air, specify an external rod lock or SAIL/BSAI variant. Side-load alignment is generally not a concern for this 50 mm stroke.
Replacement checklist
Yes, the SIJ80X50-30FA is discontinued. The direct replacement is the SAIJ80X50-30FA, offering the same ISO 15552 interface, 80 mm bore, 50 mm stroke, 30 mm adjust window, G3/8 port, and FA mounting.
The external stop screw allows trimming the extend stroke by up to 30 mm on-site, yielding a 20-50 mm usable stroke. The stop sets end position and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ80X50-30FA replacement — usually within 7 hours.