verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC200 · F.R.L. Combination (filter + regulator + lubricator)

GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8

The AirTAC GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainDifferential-pressure drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$86.58 $94.08Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC200-06 drain, gauge and thread option on one page All GC200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8

The GC20006LF2WTK is a genuine AirTAC GC200 three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This configuration is decoded as a size 200 unit with 1/8 in NPT ports, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, a low-pressure type regulator, an embedded square gauge reading in psi, and a reverse/check valve fitted. It filters water and particulate from compressed air, holds a set downstream pressure, and adds oil mist to keep downstream air tools and actuators lubricated.

This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of ports, threads (NPT on this code), drain types, filter grades, gauge styles and scales. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm flow and datasheet figures on request.

GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8 Technical Specifications

ModelGC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8
SeriesGC200 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/8" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeDifferential-pressure drain
Bowl materialPC
Pressure gaugeFitted — square, psi scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8

GC200G-series F.R.L. combination, 200 body — sets the port range.
06Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4".
(blank)Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC200 · PT1/8" · 5 µm
One size upGC300
Two-unit equivalentGFC200-06
Build orderFilter → regulator → lubricator

Where the GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8 Is Used

precision_manufacturing

Small CNC machine air supply

Feeds filtered, regulated and lubricated air to the pneumatic clamps and tool-change cylinders on a compact CNC milling or turning cell, with the 5 um element protecting the machine's air valves from fine particulate.

conveyor_belt

Packaging conveyor actuation

Supplies the diverters, pushers and stopper cylinders on a packaging or bottling conveyor line, holding a steady regulated pressure so cartons are pushed consistently shift after shift while the lubricator keeps cylinders running smoothly.

build

Assembly-line air tools

Conditions the air feeding impact drivers, nut runners and air ratchets at an assembly bench, filtering water and grit, regulating supply pressure and delivering oil mist to extend tool life.

Is the GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8 the Right Station?

Start with the size and port: the 200 size with 1/8 in NPT ports suits compact circuits, and stepping up to 300, 400 or 600 gives larger ports and more flow capacity. The 5 um element in this unit is the finer filter grade (40 um is the standard alternative) - choose it where downstream valves and cylinders need cleaner air. Drain is differential-pressure as coded; automatic (A) and manual (M) drains are available on the family. The gauge here is the embedded square type with a psi scale; an external round gauge with MPa, psi or bar scales is optional. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Note that this is the low-pressure regulator type; its exact adjustment range is not published in the material we hold, so ask us to confirm it against your set pressure before ordering. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT1/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.

GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8 FAQ

AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, set pressure and the flow your application needs, and we will confirm against the datasheet whether this 200-size unit with 1/8 in NPT ports is correctly sized before you order.

The L in the code marks this as the low-pressure type regulator rather than the standard type; its exact adjustment range is not published in our current material, so confirm your set pressure with us before ordering. The filter bowl uses the differential-pressure drain (the default), which bleeds accumulated water automatically as flow passes through, with no manual draining routine required.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC20006LF2WTK AirTAC F.R.L. Combination, NPT1/8

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC20006LF2WTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.