verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC200 · F.R.L. Combination (filter + regulator + lubricator)

GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8

The AirTAC GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/8"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$71.65 $79.15Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC200-06 drain, gauge and thread option on one page All GC200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8

The GC20006MF2WT is a three-piece AirTAC GC series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. In use it cleans water and particulate from the compressed air, holds downstream pressure at your set point within the 0.05-0.9 MPa (7-130 psi) adjustment range, and adds a controlled oil mist to extend the life of downstream pneumatic actuators and valves.

This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge scale and thread (NPT on this code). Flow figures for this series are published as curves rather than a single rated number, so ask us to confirm the datasheet and sizing for your application on request.

GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8 Technical Specifications

ModelGC20006MF2WT AirTAC F.R.L. Combination, NPT1/8
SeriesGC200 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/8" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, psi scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8

GC200G-series F.R.L. combination, 200 body — sets the port range.
06Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC200 · PT1/8" · 5 µm
One size upGC300
Two-unit equivalentGFC200-06
Build orderFilter → regulator → lubricator

Where the GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8 Is Used

precision_manufacturing

CNC machine tool clamping circuits

Filtered, regulated and lubricated air for the pneumatic clamps and tool-change cylinders on a machining centre, with the 5 um element protecting close-tolerance valves.

conveyor_belt

Packaging line diverters and sealers

A single supply point feeding the air cylinders that push, divert and seal cartons on a packaging conveyor, keeping moisture out and oil mist in for long cylinder life.

factory

Assembly bench air drops

Conditioned air for hand-held pneumatic tools and bench fixtures at an assembly workstation, with the regulator set to the tool's rated pressure and read on the psi gauge.

Is the GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8 the Right Station?

Start with the size and port: the 200 series with its 1/8 in NPT port suits compact circuits, while stepping up to 300, 400 or 600 gives larger ports for higher air demand - match the step to the flow your circuit needs. This unit has a manual drain, which means an operator opens the bowl drain periodically; if you prefer automatic or differential-pressure draining, those are available in the range. The 5 um element here is the finer filtration choice for sensitive downstream components; the 40 um standard grade suits general circuits. The square gauge is fitted in psi; MPa and bar scales, an external round gauge, and G or NPT threads are selectable options, and a mounting bracket is included. Because flow for this series is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.

GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8 FAQ

AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and required flow, and we will confirm the sizing from the datasheet on request before you order.

The M code in GC20006MF2WT specifies a manual drain: the filter bowl is emptied by hand at intervals. The GC range also offers automatic drains and the differential-pressure drain as the default, so choose manual where drains are checked routinely and automatic or differential where the unit is not easily reached.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC20006MF2WT AirTAC F.R.L. Combination, NPT1/8

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC20006MF2WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.