verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC200 · F.R.L. Combination (filter + regulator + lubricator)

GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

The AirTAC GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/4"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainDifferential-pressure drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$86.58 $94.08Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC200-08 drain, gauge and thread option on one page All GC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

The AirTAC GC20008LF2WTK is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one GC200 unit. The filter element is the fine 5 um grade (code W), so it strips water and particulate down to 5 microns before the air reaches the regulator; condensate leaves through the differential-pressure drain, which bleeds the bowl automatically as pressure drops. The regulator in this code is the low-pressure type (code L) with a fitted square gauge reading in psi, and a reverse/check valve (code K) is fitted downstream. The 1/4 in NPT ports suit compact supply drops, the polycarbonate bowls let you see the fluid level and condensate at a glance, and the mounting bracket is included.

This is a genuine AirTAC part. The GC family is published in sizes 200, 300, 400 and 600, with port sizes stepping up from 1/8 in to 1 in, drain types (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um optional), gauge styles and scales, and G or NPT thread options alongside the NPT standard. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.

GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um Technical Specifications

ModelGC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um
SeriesGC200 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/4" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeDifferential-pressure drain
Bowl materialPC
Pressure gaugeFitted — square, psi scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

GC200G-series F.R.L. combination, 200 body — sets the port range.
08Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4".
(blank)Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC200 · PT1/4" · 5 µm
One size upGC300
Two-unit equivalentGFC200-08
Build orderFilter → regulator → lubricator

Where the GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um Is Used

precision_manufacturing

Pneumatic press and clamping fixtures

On a bench press or clamping station running air cylinders, this unit filters supply air to 5 um, holds a stable low-pressure setting on the gauge, meters oil mist to the cylinders, and the check valve holds the circuit if upstream supply dips.

conveyor_belt

Packaging and case-sealing lines

Packaging machines with air-actuated sealers, sorters and diverters need clean, regulated, lubricated air at each drop; the 5 um element protects tight valve clearances and the psi gauge gives operators a visible setpoint at the machine.

factory

Textile and food-adjacent plant air drops

At individual machine drops across a plant floor, this three-piece set conditions the air where the machine connects: fine filtration for the machine's valves, low-pressure regulation for sensitive actuators, and lubrication for air motors and cylinders.

Is the GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um the Right Station?

Size the GC series by the port step and the flow your line needs: this unit is size 200 with 1/4 in NPT ports; larger sizes (300/400/600) carry larger ports and more flow. The filter grade here is the fine 5 um element (code W); the 40 um standard element suits general supply air where only bulk water and coarse particles matter. Drain type is a real choice: differential-pressure (fitted here) bleeds on pressure drop, automatic drains continuously, and manual drain requires an operator to twist the bowl. The gauge is the embedded square type with a psi scale; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A mounting bracket is included with this code. Because AirTAC publishes flow as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.

GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um FAQ

AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a rated flow, Cv or SCFM figure. Send us your application details and we will confirm the datasheet flow curve and sizing for this 1/4 in unit on request.

The L in the code marks the low-pressure regulator type, intended for circuits that run below the standard regulator's normal working band. The exact adjustment range for the low-pressure type is not published in the data we hold, so ask us and we will confirm the figure from the datasheet on request.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC20008LF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC20008LF2WTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.