verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um

The AirTAC GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/4"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainDifferential-pressure drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$107.41 $114.91Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-08 drain, gauge and thread option on one page All GC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um

GC30008LC2WT is an AirTAC GC three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for 1/4 in NPT ports. This configuration carries the 5 um filter element (code W) with a differential-pressure drain, a low-pressure type regulator, a round gauge scaled in psi, and includes a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The filter and lubricator bowls are polycarbonate (PC); only size 600 units use aluminium alloy bowls.

This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge style and scale, thread form (NPT on this code) and reverse/check valve. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.

GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um Technical Specifications

ModelGC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/4" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeDifferential-pressure drain
Bowl materialPC
Pressure gaugeFitted — round, psi scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um

GC300G-series F.R.L. combination, 300 body — sets the port range.
08Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/4" · 5 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-08
Build orderFilter → regulator → lubricator

Where the GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um Is Used

precision_manufacturing

CNC machine pneumatic supply

Feeding filtered, regulated and lubricated air to clamps, tool-change cylinders and chip-clearing jets on a machining centre, with the 5 um element protecting fine valve spools.

conveyor_belt

Packaging line actuation

Conditioning the air supply for case-erectors, sealing jaws and diverters on a packaging conveyor, where the differential-pressure drain keeps condensate out of the run without daily manual draining.

factory

Assembly-cell air drops

A point-of-use F.R.L. at an assembly bench supplying air tools and small cylinders, with the low-pressure regulator and psi gauge letting the cell run at its own working pressure.

Is the GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um the Right Station?

Start with the port: this unit is 1/4 in NPT. If your line needs more or less flow capacity, step up or down through the size range (200/300/400/600), where larger sizes carry larger ports and greater flow capacity - we will check the published flow curves against your demand before you order. This configuration is the low-pressure regulator type, so if your circuit runs at reduced working pressures, tell us the set point and we will confirm suitability; the exact regulation range for the low-pressure type is not published in the catalogue. The 5 um element (W) suits finer particulate removal than the 40 um standard; the differential-pressure drain flushes collected water automatically as flow passes through, while automatic (A) and manual (M) drain variants exist in the family. The fitted round gauge reads in psi; square embedded gauges and MPa or bar scales are the other catalogue choices. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A mounting bracket is included.

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.

GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um FAQ

AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Send us your line pressure and air demand and we will confirm the sizing from the datasheet before you order.

L marks the low-pressure type regulator in this combination. It is intended for circuits that work below standard line pressures; the exact adjustment range for the low-pressure type is not published in the catalogue, so tell us your set point and we will confirm it on request.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30008LC2WT AirTAC F.R.L. Combination, NPT1/4, 5 um

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC30008LC2WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.