verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge

The AirTAC GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/4"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$107.41 $114.91Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-08 drain, gauge and thread option on one page All GC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge

The GC300 is AirTAC's three-piece F.R.L. combination: a filter, a pressure regulator and an oil-mist lubricator assembled as one air-treatment set. This unit is built for a NPT1/4 (1/4 in) port, carries a 5 um filter element (code W), and uses a manual drain on the filter bowl, which is polycarbonate at this size. The regulator is the low-pressure type, and a round pressure gauge scaled in psi is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.

This is a genuine AirTAC part. The GC series is published in sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, a choice of 40 um standard or 5 um (W) filtration, differential-pressure, automatic or manual drains, gauge scale options, and G (BSPP) or NPT threads as order options. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application. Order code GC30008MLC2WT has NPT ports (the T in the code) for North American pipe fittings.

GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge Technical Specifications

ModelGC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/4" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — round, psi scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge

GC300G-series F.R.L. combination, 300 body — sets the port range.
08Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/4" · 5 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-08
Build orderFilter → regulator → lubricator

Where the GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge Is Used

precision_manufacturing

Pneumatic press and clamping fixtures

Feeding clean, regulated and lubricated air to the cylinders and clamps of a bench or assembly press, with the 5 um element protecting valve surfaces and the manual drain cleared during shift checks.

conveyor_belt

Packaging line actuation

Supplying treated air to diverters, pushers and sealing heads on a packaging conveyor, where the low-pressure regulator holds a lower working pressure and the lubricator keeps actuation air oil-misted.

air

Low-pressure spray finishing

Conditioning air for spray guns and finishing lines that run at reduced pressure: the 5 um filtration removes water and particulate ahead of the gun, and the psi-scaled round gauge gives a direct pressure readout at the booth.

Is the GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge the Right Station?

Start from the port and size: the 300 size with a NPT1/4 port suits lines piped at 1/4 in, and the larger 400 and 600 sizes step up in port and flow capacity - match the size to the air demand of the machine. Choose the drain: this unit has a manual drain, which needs periodic draining by hand; automatic or differential-pressure drains are available if you prefer unattended operation. Filtration is 5 um here (code W); the standard element is 40 um if finer filtration is not required. The fitted gauge is round and scaled in psi; the embedded square gauge and MPa or bar scales are the other catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. One honest note: the low-pressure regulator's adjustment range is not published as a single figure, and flow is published as curves, not a rated number - ask us to confirm both against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.

GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge FAQ

AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow curve and datasheet figures for this NPT1/4, 5 um, manual-drain unit on request, so you can size it correctly before ordering.

The L in GC30008MLC2WT marks the low-pressure regulator type, intended for circuits working at lower pressures than the standard variant. The exact adjustment range for this variant is not published as a single figure, so we confirm it on request. Everything else decodes normally: NPT1/4 port, 5 um filtration, manual drain, round psi gauge, and mounting bracket included.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30008MLC2WT AirTAC F.R.L. Unit, NPT1/4, 5 um, psi Gauge

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC30008MLC2WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.