The AirTAC GFR300-10T AirTAC Filter Regulator NPT3/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300-10T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is the 300 size with a 3/8 in NPT port, low-pressure regulator type, 40 um filter element and an automatic drain that clears collected condensate from the metal bowl without manual attention. It is supplied without a gauge, without a mounting bracket and without a reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and can be ordered with manual or differential-pressure drains, a 5 um element (code W), gauges and brackets where the code calls for them. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR300-10T AirTAC Filter Regulator NPT3/8 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Point-of-use supply for a small pneumatic press or clamping fixture, where the 3/8 in NPT port feeds cylinders that need filtered air held at a steady pressure below full line pressure.
Feeding tool-clamp, chip-door and part-eject actuators on a CNC machining cell, with the automatic drain keeping condensate out of the directional valves between shifts.
Regulating filtered air to diverters, stoppers and reject pushers on a packaging conveyor line, where the low-pressure regulator type suits circuits run well below standard line pressure.
Step through size first: 200, 300, 400 and 600 map to ports from 1/8 in up to 1 in, so match the step whose published flow curve covers your air demand at your line pressure. For the drain, GFR units can be ordered automatic (this unit), manual or differential-pressure; the standard-type adjustment range differs by drain, and this low-pressure type's exact range is not published, so confirm it with us. Filter grade is 40 um as standard with 5 um available as code W. Gauges are optional (embedded square or external round, with MPa, psi or bar scales) - this unit has none. Thread: PT is the standard and G and NPT are order options; this unit is NPT. Bracket is not fitted (code J). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the flow from the datasheet for this 300-size, 3/8 in unit before you order.
This unit carries code N, so no gauge is fitted; gauges (embedded square or external round, with MPa, psi or bar scales) are order options in the GFR family. The L in the code marks the low-pressure regulator type, intended for circuits run below standard line pressure. Its exact adjustment range is not published, so we confirm it on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.