The AirTAC GFR300C10AF3T AirTAC Filter Regulator NPT 3/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C10AF3T is a size-300 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a 3/8 in NPT port, a 40 um filter element, an automatic drain that ejects collected condensate without manual attention, and an embedded square gauge reading in bar. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, a mounting bracket is included, and no reverse/check valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of PT, G (BSPP) or NPT thread, differential-pressure, automatic or manual drains, a 5 um element option (code W), and gauge or no-gauge variants. Flow is published as curves rather than a single rating, so ask us to confirm sizing or any datasheet figure for your application before ordering.
| Model | GFR300C10AF3T AirTAC Filter Regulator NPT 3/8 in |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Feeding filtered, regulated air to the cylinders and grippers on a carton-forming or wrapping line, with the automatic drain handling condensate between shifts.
Supplying a stable set pressure to pneumatic clamps and swing cylinders on a machining centre, with the bar-scale square gauge giving the operator a local setpoint readout.
Conditioning the air feeding stoppers, pushers and diverters on a bottling or distribution conveyor, where water and scale in the line would jam the valves.
Size and port are the first choice: step up through 200/300/400/600 as your flow demand and pipe size grow - this unit is size 300 with a 3/8 in NPT port. Drain type is a real operating choice: automatic drain (fitted here) suits unmanned or hard-to-reach installations, manual drain suits attended points, and the differential-pressure default drains only when the pressure drop warrants it. The 40 um element is the standard grade; specify the 5 um W option where finer filtration is needed. The embedded square gauge reads in bar here, with MPa and psi scales and an external round gauge available as options. PT is the standard thread; G (BSPP) and NPT are catalogue options to order, as on this unit. A bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number for this unit. Tell us your application and we will confirm the flow data from the datasheet on request before you order.
This configuration carries code A for an automatic drain, which ejects collected condensate without anyone having to open the drain. The GFR family is also available with a manual drain or with the differential-pressure drain as the default, and the filter grade can be stepped from the standard 40 um to the finer 5 um W option - ask us to quote the variant you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.