The AirTAC GFR300C10AJNWTK AirTAC Filter Regulator 3/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C10AJNWTK is a size-300 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is a 3/8 in NPT-port unit with 5 um filtration (the finer of the two catalogue grades), an automatic drain that discharges collected condensate without manual attention, a built-in reverse/check valve that holds downstream pressure when the supply is lost, and no gauge or mounting bracket fitted. The standard-type regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi) and an operating temperature range of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge options, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR300C10AJNWTK AirTAC Filter Regulator 3/8 in NPT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Feeds clean, regulated air to the tool-clamp and pallet-change circuits of a CNC machining centre, with 5 um filtration protecting the clamping valves and the check valve holding clamp pressure during a supply dip.
Supplies filtered, regulated air to the pneumatic diverters, pushers and sealing jaws on a packaging conveyor line, with the automatic drain keeping condensate out of the circuit without operator attention.
Installed on the air drop feeding an automated assembly cell, regulating the supply pressure to the cell's actuators and, with the check valve fitted, keeping the circuit charged if the main header is momentarily shut off.
Size and port set the capacity of the unit: this is size 300 with a 3/8 in NPT port, one step up from the 1/4 in size-200 units. Filtration is set at 5 um here rather than the standard 40 um - choose the finer grade when downstream valves, cylinders or instruments need cleaner air. The automatic drain suits unattended or hard-to-reach installations; manual and differential-pressure drains are the alternatives in the same family. No gauge is fitted with this code, so add one if you need to read or verify the regulated pressure, and note that no mounting bracket is included. PT is the standard thread; G and NPT are order options, and this unit is specified in NPT. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a l/min, m3/h or SCFM number. Tell us your application and we will confirm the flow and datasheet figures for this 3/8 in, size-300 unit on request before you order.
The W code in the model sets the finer 5 um filtration grade instead of the 40 um standard, which suits downstream valves and instruments that need cleaner air. The A code sets an automatic drain, so collected condensate is discharged without manual attention - a good fit for unattended or hard-to-reach installations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.