The AirTAC GFR300C10ALJF2WK AirTAC Filter Regulator PT3/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C10ALJF2WK is a size-300 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is built for low-pressure circuits, with a 5 um filtration element (the finer of the two catalogue grades), an automatic drain that expels collected condensate without manual attention, and a metal bowl. It carries a PT3/8 (3/8 in) PT-threaded port, an embedded square gauge reading in psi, and a reverse/check valve fitted. No mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of drain type, 40 um or 5 um filtration, gauge scale options, G/NPT thread variants and bracket choices. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures and the full datasheet for your application before ordering.
| Model | GFR300C10ALJF2WK AirTAC Filter Regulator PT3/8, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Supply filtered, regulated air to the gripper and cylinder circuits of pick-and-place units on an electronics or small-part assembly line, with the 5 um element protecting downstream valve seals.
Feed the air cylinders that divert, stop and merge containers on a bottling or packaging conveyor, with the automatic drain handling condensate on lines that run unattended between shifts.
Condition the air feeding instruments, test rigs and pneumatic fixtures on laboratory benches, where the low-pressure type and psi-reading square gauge suit sensitive low-pressure circuits.
Choose the size and port step against the air demand of your circuit: this unit is size 300 with a PT3/8 port; smaller and larger GFR sizes exist if your line needs a different step. Drain type is a real choice - automatic (this unit) suits installations that are not checked daily, while manual and differential-pressure drains are available. Filtration is 5 um here; the 40 um standard element is the alternative if coarser filtration is acceptable. The embedded square gauge reads psi; MPa and bar scales and an external round gauge are options. Thread is PT as standard, with G and NPT available to order, and brackets can be added where this unit ships without one. Because flow is published as curves, not a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a l/min or SCFM number. Send us your application details and we will confirm the flow figures and full datasheet for this PT3/8 unit on request before you order.
The A in the code selects the automatic drain: collected condensate is expelled from the metal bowl without anyone opening a valve by hand. Manual-drain and differential-pressure-drain versions of the same filter regulator are available if your maintenance routine prefers them.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.