The AirTAC GFR300C10LF3TK AirTAC Filter Regulator NPT3/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C10LF3TK is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This size 300 unit has a 3/8 in NPT port, a 40 um standard filter element, a metal bowl with differential-pressure drain, and a low-pressure regulator fitted with an embedded square gauge reading in bar. A reverse/check valve is built in and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and with choices of drain type, 40 um or 5 um filtration, gauge scale and PT, G or NPT thread. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR300C10LF3TK AirTAC Filter Regulator NPT3/8 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Feeds filtered, regulated air to spray guns and atomising headers in a paint finishing booth, where the low-pressure regulator holds a reduced setting for steady coating work.
Supplies clean, regulated air to the cylinders and air grippers that open, close and eject cartons on a packaging conveyor, with the built-in check valve protecting the downstream circuit.
Provides filtered, pressure-regulated air to the pneumatic clamps and tool-change actuators on a CNC machining cell, with the 40 um element keeping water and pipe dirt out of the valves.
Size and port are the first choices: step up from 300 to 400 or 600 when the circuit needs more flow, or down to 200 for compact lines, matching the port to your piping (here 3/8 in NPT; PT is the standard thread and G or NPT are order options). This unit is the low-pressure regulator type, selected for circuits that run at a reduced regulated pressure; the exact adjustment range is not published, so confirm it with us. Other decodable choices: drain type (differential-pressure as here, automatic with code A, or manual with code M), filter grade (40 um standard, 5 um with code W), gauge scale (MPa, psi or bar), and bracket (included here). Because flow is published as curves and not as a single rated figure, ask us to check sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for the GFR300C10LF3TK on request.
This unit carries the differential-pressure drain, the default option in the GFR range; automatic (code A) and manual (code M) drains are catalogue alternatives if your duty calls for them. Tell us your condensate handling and pressure-setting needs and we will confirm the right configuration, including the exact adjustment range for this low-pressure regulator type.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.