The AirTAC GFR300C10LJC2W AirTAC Filter Regulator PT3/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C10LJC2W is an AirTAC GFR300 filter regulator: water and particulate filtration plus pressure regulation combined in a single body, size 300, with a 3/8 in PT port. This configuration carries the 5 um filter element (code W, the finer of the two published grades), a differential-pressure drain, and the low-pressure regulator type for circuits that run at a reduced set pressure. A round pressure gauge reading in psi is fitted, and no mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, filter grades of 40 um standard or 5 um optional, a choice of differential-pressure, automatic or manual drains, and gauge, bracket and thread options. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR300C10LJC2W AirTAC Filter Regulator PT3/8, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Air supply to pneumatic clamps on a machining fixture, where the regulator holds a reduced set pressure and the 5 um element keeps the clamp cylinders supplied with clean air.
Point-of-use conditioning for a spray gun or coating head, combining fine filtration with a low regulated pressure so finish work is not disturbed by water, particles or pressure drift.
Conditioned air for the small cylinders and actuators on a carton-sealing or labelling station, with the fitted gauge giving operators a visible setpoint in psi.
Size 300 with a PT3/8 port sits mid-range in the GFR line; step up or down a size when your flow demand differs - flow is published as curves, not a single rating, so let us check the curve against your application before you order. This unit is already specified with the 5 um element (W) in place of the 40 um standard, a differential-pressure drain, the low-pressure regulator type, a round psi gauge and no bracket. Thread is PT as standard; G (BSPP) and NPT are order options. Maximum inlet pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR300 flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow curve and datasheet figures against your requirement before you order.
W marks the 5 um filter element, the finer of the two published grades; the standard element is 40 um. The rest of the code decodes as a low-pressure regulator type with a differential-pressure drain, a round psi gauge, no mounting bracket and a PT3/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.