The AirTAC GFR300C10LJF3WT AirTAC Filter Regulator NPT 3/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C10LJF3WT is an AirTAC GFR300 filter regulator: one body that first removes water and particulate from compressed air, then regulates the downstream pressure. This configuration is the low-pressure regulator type, sized for 3/8 in NPT ports, fitted with the 5 um filter element (code W instead of the standard 40 um), draining condensate by differential pressure, with the embedded square gauge scaled in bar and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauges scaled in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures against your application before ordering.
| Model | GFR300C10LJF3WT AirTAC Filter Regulator NPT 3/8 in |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Filtered, low-pressure regulated air to pneumatic clamps and swing cylinders on a machining-centre fixture, with the 5 um element helping protect the clamp valves from particulate.
Regulated supply to hold-down and guide cylinders on a packaging conveyor, where the low-pressure type suits product-handling stations that run below standard line pressure.
Clean, regulated pilot supply to solenoid and process valves on a bottling or filling line, with the differential-pressure drain handling condensed water during operation.
The real choices in this family are decodable from the code. Size 300 with a 3/8 in port sits mid-range: step up to 400 or 600 for larger ports and more flow, or down to 200 for compact lines, and confirm the step against the flow curve for your demand. This unit carries the 5 um element (W) rather than the standard 40 um, the low-pressure regulator type, a differential-pressure drain (automatic and manual drains are order options), a square gauge scaled in bar (MPa and psi scales can be specified), and no bracket (specify the bracket variant if you need to mount the unit). The thread here is NPT; PT is the standard thread and G (BSPP) is also a catalogue option to order. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure, port size and air demand, and we will confirm the flow figures from the datasheet on request.
The 40 um element is the standard grade for general water and particulate removal, while the 5 um W grade is the finer option for downstream equipment that is more sensitive to particles. This unit is fitted with the 5 um element; 40 um versions of the same GFR300 size can be specified instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.