The AirTAC GFR300C10MLC2WG AirTAC Filter Regulator G3/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C10MLC2WG is a GFR-series filter regulator: a single body that removes water and particulate from compressed air and regulates downstream pressure. This configuration is size GFR300 with G3/8 (3/8 in) ports, a 5 um filter element (the finer W grade, against the 40 um standard), a metal bowl with manual drain, the low-pressure regulator type, and a round pressure gauge with a psi scale. A mounting bracket is included; no reverse (check) valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options for drain type, filter grade, gauge style and scale, thread (PT standard; G and NPT orderable) and low-pressure type. Maximum inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR300C10MLC2WG AirTAC Filter Regulator G3/8, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Filter and regulate the air feeding cylinder-driven tapers and stampers on a packaging line: the 5 um element protects the directional valves and the psi gauge gives operators a setpoint they can read at a glance.
The low-pressure regulator type suits bench rigs and lab skids where actuators and sensors run well below full line pressure, and the manual drain lets a technician bleed collected water before each test session.
Supply clean, regulated air to stoppers, pushers and divert cylinders along a conveyor run; the included bracket mounts the unit at the section panel and the metal bowl with manual drain keeps water out of the station circuit.
Choose the size by port and flow: this unit is size 300 with G3/8 ports, while sizes 400 and 600 step up in port and flow capacity. The 5 um element suits air feeding sensitive valves and instruments; the 40 um standard grade is the usual choice for general circuits. The manual drain needs periodic bleeding by an operator; automatic and differential-pressure drains are available where that is impractical. The round gauge here reads psi; embedded square gauges and MPa or bar scales are the other options. Thread is G (BSPP); PT is the standard and NPT is orderable. A bracket is included. Because flow is published as curves, not a single rating, send us your flow and pressure requirements and we will confirm this model against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR300 flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your flow and working pressure and we will confirm the sizing from the datasheet on request.
The W code in GFR300C10MLC2WG selects the optional 5 um grade, which filters finer than the 40 um standard element. It is a good match when downstream valves or instruments are sensitive to particles; the 40 um grade remains the standard choice for general plant air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.