The AirTAC GFR300C10MLJC1TK AirTAC Filter Regulator 3/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C10MLJC1TK is an AirTAC GFR300 filter regulator: a size 300 unit that removes water and particulate from compressed air and regulates pressure in a single body. This configuration is built for a 3/8 in NPT port, has a metal bowl with a manual drain, a 40 um standard filter element, and the low-pressure regulator type. A round MPa pressure gauge is fitted and the code K reverse/check valve is installed. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include automatic, manual or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rating, so ask us to confirm the figures from the datasheet for your application.
| Model | GFR300C10MLJC1TK AirTAC Filter Regulator 3/8 in NPT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Feeds filtered, regulated air to the clamping cylinders on a machining center, where the low-pressure regulator type holds a lower set pressure for workholding without over-clamping the part.
Sits upstream of the directional valves and cylinders on a carton-forming or sealing conveyor, cleaning condensate and particles out of the air before they reach the valve seats.
Serves as point-of-use air preparation at a factory air drop, giving each workstation its own filtered and regulated supply for actuators, air guns and small pneumatic tools.
The main choice is size and port: 200, 300, 400 and 600 step up in port and flow capacity, so match the 3/8 in NPT port on this unit to your line size and air demand. Drain type is a real decision: this unit has a manual drain you operate by hand, while automatic and differential-pressure drains remove condensate without attention. Filter grade is 40 um as standard here; specify code W for a 5 um element where finer filtration is needed. Gauge scale (MPa, psi or bar), thread (PT standard, G or NPT to order) and bracket are also selectable. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 as curves rather than a single rated figure, so no single number is quoted here. Tell us your inlet pressure, set pressure and air demand and we will confirm the flow from the datasheet for your application on request.
The L in the code marks the low-pressure regulator type, intended for applications where the regulated set pressure sits below the standard range. The exact adjustment range for this low-pressure version is not published in the catalogue sheet we use, so we confirm it on request. Maximum inlet pressure remains 1.0 MPa (145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.