The AirTAC GFR300C10MLJC2WK AirTAC Filter Regulator PT3/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C10MLJC2WK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at a set value in a single body. This unit is built on the GFR300 size with a PT3/8 port, a 5 um filter element (code W), a manual drain on a metal bowl, and the low-pressure regulator type; the exact adjustment range for the low-pressure type is not published, so confirm it with us if your set pressure is critical. It includes an external round gauge reading in psi and a reverse/check valve, and is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options for drain type, 40 um or 5 um filtration, gauge style and scale, G or NPT threads, and brackets. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow for this series is published as curves rather than a single rating, so ask us to confirm the figures from the datasheet for your application.
| Model | GFR300C10MLJC2WK AirTAC Filter Regulator PT3/8, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Feeding low-pressure clamp and hold-down cylinders on an assembly fixture, where the regulator holds a gentle set pressure and the fitted reverse/check valve backs up the circuit in the supply line.
Conditioning air to paint spray guns and coating heads, where the 5 um element strips fine particulate and water carryover before it can reach the finish.
Point-of-use preparation for carton sealers and wrapping machines, with the round psi gauge giving operators a local pressure reading and the manual drain used for end-of-shift bleeding.
Choose the size by the port step and the flow your line needs: this unit is size 300 with a PT3/8 port, and larger sizes carry larger ports and more flow. The 5 um element suits air feeding sensitive components, while the 40 um standard element is the usual choice for general service. The manual drain needs an operator to bleed the bowl; automatic and differential-pressure drains are available on other codes. The round psi gauge is fitted here; the embedded square gauge and MPa or bar scales are the alternatives. PT is the standard thread, with G (BSPP) and NPT as order options, and a bracket can be added on codes that include one. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Ask us and we will confirm the flow and the full datasheet figures for this size-300, 3/8-inch unit against your application.
The M in the code selects a manual drain: an operator opens it to bleed collected water from the metal bowl. Choose it where the unit is checked regularly; choose an automatic or differential-pressure drain code where the drain must work unattended. The 5 um element (code W) is the finer of the two published grades, the other being the 40 um standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.