The AirTAC GFR300C10MLJC3WTK AirTAC Filter Regulator NPT 3/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C10MLJC3WTK is an AirTAC GFR-series filter regulator: a 5 um filter element and a pressure regulator combined in one body, size 300, with a 3/8 in NPT port. This configuration is the low-pressure regulator type, fitted with a manual drain, a metal bowl, an external round gauge with bar scale, and a reverse (check) valve; no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is made in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and with choices of drain type, filter grade (40 um standard, 5 um optional), gauge style and scale, thread (PT standard; G and NPT as order options) and bracket. Flow for this family is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR300C10MLJC3WTK AirTAC Filter Regulator NPT 3/8 in |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Point-of-use filtration and pressure setting for the clamps and fixtures on a machining cell, with the 5 um element helping keep water and fine particles out of the clamp cylinders.
The low-pressure regulator type suits process and pilot air circuits that operate below standard regulator settings, with filtration and regulation handled in a single body.
A filter regulator at the drop feeding a packaging machine's cylinders and air jets, with the manual drain emptied during shift checks and the bar gauge giving a local pressure readout.
The real choices on this family: step between sizes 200, 300, 400 and 600 to match the port and the flow your line needs; choose the drain - differential-pressure (default), automatic, or manual as coded here; pick the filter grade, 40 um standard or 5 um (W) as fitted on this unit; and select gauge style and scale (MPa, psi or bar) - this model carries a round, bar-scale gauge. Thread is NPT on this model; PT is the standard and G (BSPP) is also available to order. No bracket is included with this configuration, and a bracket can be ordered separately. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the sizing from the datasheet before you order.
This unit is coded M for a manual drain: the bowl is emptied by hand as part of routine maintenance. AirTAC also offers automatic and differential-pressure drains across the GFR family if you would prefer the bowl to be drained without operator action.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.