
The AirTAC 4V120-06AI Solenoid Valve, 5/2-way, PT1/8, AC220V, grommet entry (4V12006AI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V120-06AI directs compressed air to double-acting cylinders and actuators, using a dual-solenoid pilot arrangement that gives the 5/2 spool a memory function. Pulse one coil to shift the spool, and it stays in that last-commanded position even when both coils are de-energised—held by land friction and balanced pressure, with no spring to return it and no holding current. This AC220V model ships with a grommet-style electrical entry, providing a 0.5 m pre-wired flying lead that simplifies DIN-rail wiring in control cabinets.
Built on the compact 4V100 aluminium body, the valve delivers an effective area of 10.2 mm² (Cv 0.6) and can cycle at up to 5 times per second. Its AC220V coil draws 3.5 VA, and the spool responds in 0.05 s or less, making it a crisp pilot for small-bore cylinders in the ~Ø16-32 mm range. The 1/8-inch PT (Rc) ports thread directly into common pneumatic subplates, and the IP65-rated enclosure keeps the internals clean in dusty or washdown-adjacent environments.
| Model | AirTAC 4V120-06AI Solenoid Valve, 5/2-way, PT1/8, AC220V, grommet entry (4V12006AI) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory spool holds the diverter gate in its last position between cycles, letting a central PLC pulse the valve once and then move on to other tasks without holding the output high.
Controls a double-acting gripper or Z-axis cylinder on a compact assembly cell. The 5 c/s max frequency keeps pace with rapid pick rates, and the grommet lead simplifies cable routing in tight enclosures.
Drives a small double-acting actuator that meters fluid or moves a probe. The AC220V coil fits standard lab mains, and the IP65 body tolerates occasional splashes during cleaning.
Choose the 4V120-06AI when your circuit needs a 5/2 valve that remembers its last position without a sustained electrical signal—ideal for sequences where power is removed between steps. If the cylinder bore exceeds 32 mm or you need faster fill rates, step up to the 4V200 series (Cv 1.0) for the extra flow capacity. For applications that must default to a safe state on power loss, a single-solenoid spring-return 4V110 is the better fit.
When replacing an existing valve, match five points: the 4V100 body size, the double-solenoid 5/2 function (code 20), the 1/8-inch port with PT thread, the AC220V coil voltage, and the grommet (I) electrical entry. This model can be mounted individually or ganged on a manifold base, which simplifies air supply and exhaust plumbing across multiple stations.
AirtacDistr lists every 4V120-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v120-06-solenoid-valve
Quick checklist
With an effective area of 10.2 mm² (Cv 0.6), it suits double-acting cylinders roughly Ø16-32 mm in typical short-stroke automation. For larger bores or very high-speed applications, moving to a 4V200 (Cv 1.0) will give you the extra flow margin.
The spool stays in its last pulsed position, but the valve alone is not a safety brake. If the cylinder must hold a suspended or vertical load when pressure drops, add a pilot-operated check valve at the cylinder ports or a dedicated mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.