
The AirTAC 4V100 Solenoid Valve 4V130P-M5-A is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with M5 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V130P-M5A is a 5/3-way double solenoid valve belonging to the compact 4V100 series, engineered to direct compressed air to small double-acting cylinders and actuators. In its de-energized center position, this pressure-center model supplies pressure to both cylinder ports simultaneously, which can be useful for locking a cylinder in place or applying balanced force in a clamping application. With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06) and a maximum cycling frequency of 3 cycles per second, it is ideally matched to cylinders in the Ø16-32 mm range.
This specific configuration operates on an AC220V coil drawing 3.5 VA, connected via a standard terminal box. The valve body is an aluminum alloy, housing a spool mechanism that achieves a response time of 0.05 seconds or less. All M5 threaded ports are integrated directly into the body, making this an exceptionally lightweight solution at just 200 grams for benchtop pneumatic systems.
| Model | Airtac 4V100 Solenoid Valve 4V130P-M5-A |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center function applies balanced force to a small double-acting clamp, holding a delicate workpiece securely without drifting, ideal for electronics assembly or testing jigs.
Controls a small double-acting actuator for precise positioning in a compact lab device. The M5 ports and 200 g weight fit perfectly in space-constrained analytical instruments.
Drives a Ø20 mm double-acting cylinder for ejecting lightweight plastic parts from a mold. The 3.5 VA AC220V coil integrates easily with standard factory power.
Select the 4V130P-M5A when your application requires a small, double-solenoid valve that applies pressure to both cylinder ports at center, such as for a clamping fixture that must not drift. The M5 port size is perfect for micro-cylinders and compact grippers where space and weight are at a premium. If your cylinder is larger than Ø32 mm or requires a faster fill rate, consider stepping up to the 4V200 series which offers a higher Cv of 1.0.
When replacing an existing valve, verify all five points: the 4V100 body size, the 5/3 pressure-center function (30P), the M5 thread type, an AC220V voltage requirement, and the terminal box electrical entry. For multi-valve assemblies, this unit is compatible with the 4V100 series manifold base, allowing you to build a clean, integrated valve group.
AirtacDistr lists every 4V130P-M5 order code with its price on one page at https://airtacdistr.com/products/airtac-4v130p-m5-solenoid-valve
Quick checklist
In the de-energized center position, the valve spool blocks the exhaust path and connects the supply port to both cylinder ports (A and B). This pressurizes both sides of a double-acting cylinder, creating a balanced holding force. It is not a safety lock; for critical load holding, use an external pilot-operated check valve.
With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06), the 4V130P-M5A suits double-acting cylinders roughly in the Ø16-32 mm range. It pairs well with small bore cylinders on compact automation where the M5 port thread is standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.