
The AirTAC 4V220-06AI Solenoid Valve, 5/2-way, PT1/8, AC220V, grommet entry (4V22006AI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
This AirTAC 4V220-06AI directs compressed air to double-acting cylinders and actuators, using a 5/2 double-solenoid design with a memory function. The spool stays in its last pulsed position when power is removed—held by land friction and balanced pressure, not by a spring or holding current—making it ideal for sequences where the valve must retain its state without a constant electrical signal.
Supplied with an AC220V coil drawing 4.5 VA and a grommet-style electrical entry with a 0.5 m pre-wired flying lead, this valve simplifies installation on DIN-rail setups. It delivers an effective area of 17.0 mm² (Cv 1.0, catalog figure for the 4V210-08) and a response time of 0.05 s or less, suiting ~Ø32-50 mm cylinders in general industrial automation.
| Model | AirTAC 4V220-06AI Solenoid Valve, 5/2-way, PT1/8, AC220V, grommet entry (4V22006AI) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 320 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory spool holds a diverter gate open or closed after a brief pulse, reducing coil heat and letting the PLC move on to the next step without maintaining an output.
Pulse the 4V220-06AI to clamp a part; the valve stays in position through e-stop cycles, so the fixture remains secure while the operator diagnoses the machine.
A double-acting pusher extends on one pulse and retracts on the next. The AC220V grommet lead plugs directly into the station’s terminal strip, speeding up panel wiring.
Choose the 4V220-06AI when your circuit needs a 5/2 valve that remembers its last position after a pulse, eliminating the need for a continuous signal. The 1/8in PT port and AC220V grommet entry make it a direct fit for machines already wired for 220 VAC control with flying-lead connections.
If your cylinder is smaller than Ø32 mm, the 4V100 series (Cv 0.6) may offer a more compact solution. For larger bores above Ø50 mm or faster cycle times, step up to the 4V300 (Cv 1.65). When replacing an existing valve, verify all five points: 4V200 body, 5/2 double-solenoid function, 1/8in PT port, AC220V coil voltage, and grommet electrical entry.
AirtacDistr lists every 4V220-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v220-06-solenoid-valve
Quick checklist
The spool remains in the position it was last pulsed to. There is no spring to return it and no holding current required, so the cylinder stays put until the opposite coil receives a signal. Note that this is not a safety-rated hold; for suspended loads, add a pilot-operated check valve or mechanical brake.
No—the 4V220-06AI is built with an AC220V coil (4.5 VA). For DC24V operation with the same 1/8in port and grommet entry, select the 4V220-06BI model, which uses a 3.0 W DC coil.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.