
The AirTAC 4V230C-06AI Solenoid Valve, 5/3-way, closed center, PT1/8, AC220V, grommet entry (4V230C06AI) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230C-06AI is a 5/3-way double-solenoid pneumatic valve that directs compressed air to double-acting cylinders and actuators, with a closed center position that blocks all ports when both solenoids are de-energised. This mid-position holds the cylinder in place, making it useful for clamping or stopping a load at an intermediate point. It belongs to the 4V200 body class, offering an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling frequency of 3 cycles per second.
This specific SKU is factory-configured with an AC220V coil drawing 4.5 VA and a grommet-style electrical entry that provides a 0.5 m flying lead for direct wiring into a machine's cable chain or junction box. The valve body weighs 360 g, uses PT (Rc) tapered threads on its 1/8-inch ports, and carries an IP65 protection rating. Its spool responds in 0.05 seconds or less, giving crisp actuation for general industrial tasks.
Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.
| Model | AirTAC 4V230C-06AI Solenoid Valve, 5/3-way, closed center, PT1/8, AC220V, grommet entry (4V230C06AI) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The closed center blocks all ports at rest, allowing a cylinder to stop and hold a clamp at an intermediate position without air consumption or drift during the dwell.
Drives a double-acting cylinder on a diverter gate. The 5/3 closed center holds the gate in a mid-position, while the AC220V grommet lead integrates directly into the line's power track.
Controls a Ø40 mm lift cylinder in a pick-and-place unit. The 13.6 mm² effective area provides adequate flow for smooth raising and lowering, and the closed center prevents sagging when stopped.
Choose the 4V230C-06AI when your application needs a 5/3 closed-center function on a 1/8-inch ported base. The closed center blocks cylinder movement at rest, which is ideal for holding a vertical load briefly during an E-stop sequence—though a pilot-operated check valve or mechanical brake must be added for true safety-rated load holding. If your cylinder bore is below Ø25 mm and speed is not critical, the smaller 4V100 series (Cv 0.6) may be a better physical fit, while the 4V300 series (Cv 1.65) suits bores above Ø50 mm or faster cycle times.
When replacing an existing valve, match five points: confirm the 4V200 body size, the 5/3 closed-center function (30C), the 1/8-inch PT port, the AC220V coil voltage, and the grommet (flying-lead) electrical entry. This model can be mounted individually or ganged on a manifold base, and the grommet entry simplifies wiring where a terminal box is hard to reach.
AirtacDistr lists every 4V230C-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v230c-06-solenoid-valve
Quick checklist
With an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), this 5/3 valve suits double-acting cylinders roughly in the Ø32–50 mm range for typical industrial speeds. Smaller cylinders will cycle faster; larger bores may move noticeably slower and should be evaluated against the 4V300 series (Cv 1.65).
Both solenoids de-energise and the spool springs to the center position, blocking the inlet, exhaust, and both cylinder ports. This traps air in the cylinder, holding the piston in place. For suspended or safety-critical loads, always add an external pilot-operated check valve or mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.