
The AirTAC 4V320-08 Solenoid Valve, 4V300 Series (4V32008A-AM) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/4 ports and an effective area of 28.0 mm² (Cv 1.65). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V32008A-AM is a 5/2-way double solenoid valve from AirTAC's 4V300 family, supplied in a 1/4in PT-port body with AC220V terminal-box wiring and an AMISCO (Italian) solenoid coil fitted at the factory. As a double solenoid it works on memory: a short pulse to either coil shifts the spool, and the spool simply stays where it was last pulsed to, held by land friction and balanced pressure, with no spring to return it and no holding current drawn. It switches air to a double-acting cylinder or actuator, feeding one port while exhausting the other.
This 4V300 body flows through an effective area of 28 mm2 (Cv 1.65) at up to 4 cycles per second, activating in 0.05 s or less, so it pairs naturally with bores around O50-80 mm. The complete valve weighs 400 g, carries an IP65 (DIN40050) terminal box, and needs no lubrication. Because the AMISCO coil replaces the standard AirTAC coil, confirm its exact electrical rating for AC220V with us before ordering.
| Model | AirTAC 4V320-08 Solenoid Valve, 4V300 Series (4V32008A-AM) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/4 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 28.0 mm² (Cv 1.65) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 4 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 400 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 28.0 mm² |
|---|---|
| Flow coefficient | Cv 1.65 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
Medium-bore press cylinders around O50-80 mm get quick 0.05 s switching and Cv 1.65 (catalog figure for the 4V310-10) flow, and the memory function keeps the ram at its last commanded side even after the pulse signal drops.
On transfer and lifting actuators, the held-last-position behaviour is useful: a brief AC220V pulse sets the direction, and the spool keeps it without consuming coil power between moves.
Double-acting clamp cylinders stay clamped or released as last pulsed, and the 4 c/s cycling rate keeps up with fast fixture sequences; for suspended or falling loads add a pilot-operated check or mechanical brake rather than relying on the valve alone.
Size by flow: step down to the 4V200 (Cv 1.0) for small bores, stay on this 4V300 (Cv 1.65) for cylinders around O50-80 mm, or move up to the 4V400 (Cv 2.82) for larger bores. Choose the double solenoid 5/2 when your circuit benefits from position memory after the electrical signal is removed; pick the single solenoid 4V310 if a spring return is mandatory, or a 5/3 4V330 variant for mid-position hold, float or pressurise. One valve with individual piping works fine, but a base-mounted manifold group saves space and piping on multi-valve machines.
When replacing, match all five points: 4V300 body size, function 20 (double solenoid 5/2), 1/4in port with PT thread, AC220V coil, and terminal-box entry. The -AM suffix means the coil is AMISCO rather than standard, which swaps no other spec.
Quick checklist
With an effective area of 28 mm2 (Cv 1.65) and up to 4 cycles per second, this 5/2 double solenoid valve suits double-acting cylinders roughly O50-80 mm. It directs air to one side of the piston while exhausting the other; it is not rated for single-acting cylinders.
After a pulse, the spool stays in its last position through land friction and balanced pressure, with no spring action and no holding current, so the cylinder keeps its commanded direction until the next pulse. The -AM option fits an AMISCO Italian coil in place of the standard one on the AC220V terminal version; body, ports and flow are unchanged, but confirm the AMISCO coil's exact electrical rating with us when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.