
The AirTAC 4V330E-10AI Solenoid Valve, 5/3-way, exhaust center, PT3/8, AC220V, grommet entry (4V330E10AI) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT3/8 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330E-10AI is a 5/3-way double solenoid valve that directs compressed air to double-acting cylinders and actuators. Its exhaust center configuration means that when both solenoids are de-energized, the cylinder ports are connected to exhaust, allowing the actuator to float freely—ideal for applications where the load must be moved manually or by an external force at rest. This model comes pre-wired with a 0.5 m flying lead via a DIN-style grommet entry and operates on an AC220V coil drawing 4.5 VA.
Built on the 4V300 aluminum-alloy body with 3/8in PT ports and 1/4in exhausts, this valve provides an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10). It suits double-acting cylinders in the ~Ø50-80 mm range and achieves a response time of 0.05 seconds or less. With IP65 protection and a max frequency of 3 cycles per second, it delivers reliable performance in industrial pneumatic systems.
| Model | AirTAC 4V330E-10AI Solenoid Valve, 5/3-way, exhaust center, PT3/8, AC220V, grommet entry (4V330E10AI) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
Controls pneumatic gates and diverters on conveyor systems. The exhaust center allows the gate to be moved freely for manual clearing or jam resolution without fighting trapped air pressure.
Operates double-acting clamps in woodworking or assembly fixtures. At center, the clamp cylinder floats, letting an operator manually reposition the workpiece before the next automatic cycle.
Drives an assist cylinder on a forming press. The 5/3 exhaust center ensures the cylinder rod can be pushed back by the press return stroke without back-pressure, reducing cycle time.
Choose the 4V330E-10AI when your application requires a 5/3 exhaust center function with AC220V power and a pre-wired grommet connection. The 4V300 body size is the right fit for cylinders roughly Ø50-80 mm; if you are driving a smaller bore, stepping down to a 4V200 series (Cv 1.0) may be more economical, while larger actuators often benefit from the higher flow of a 4V400 (Cv 2.82). The exhaust center is specifically for circuits where the cylinder must be free of residual pressure at idle.
For a direct replacement, match these five points: body size (4V300), function (5/3 exhaust center), port and thread (3/8in PT), coil voltage (AC220V), and electrical entry (grommet with flying lead). This valve can be mounted individually or on a manifold base to build a compact valve group.
AirtacDistr lists every 4V330E-10 order code with its price on one page at https://airtacdistr.com/products/airtac-4v330e-10-solenoid-valve
Quick checklist
In the center (neutral) position, both cylinder ports (A and B) are connected to the exhaust ports. This depressurizes both sides of a double-acting cylinder, allowing the piston rod to be moved freely by an external force. It is not a holding position—the load must be supported by other means if it needs to stay in place.
Functionally, yes—the valve body, port size, and spool are identical. However, the electrical connection differs: this model has a 0.5 m flying lead from a grommet instead of a terminal box. Ensure your enclosure can accept the wire entry, and verify that your supply matches the 4.5 VA AC220V coil rating.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.