Airtac ACE Compact Cylinder ACE100X150
The AirTAC Airtac ACE Compact Cylinder ACE100X150 is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X150
This AirTAC ACE100X150 is a double acting ISO 21287 compact cylinder with a 100 mm bore and 150 mm stroke, delivering 3927 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, fitting into tight machine frames and guarding where a full-length cylinder won't fit.
The S45C carbon-steel rod is hard-chrome plated for wear resistance, and the fixed TPU bumper absorbs energy at both ends of the stroke. For a 2:1 safety margin on vertical lifts, this model can handle about 200 kg of real payload at 0.5 MPa, making it a strong choice for heavy lifting and pressing tasks.
Airtac ACE Compact Cylinder ACE100X150 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X150 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X150
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X150 Is Used
Heavy Press Ram
Use the 3927 N push force to drive a small arbor press for inserting bushings into aluminium housings, with the compact body fitting under a bench-mounted frame.
Pallet Stop
Deploy on a conveyor line to raise a pallet stop that holds back loaded pallets weighing up to 200 kg, using the 150 mm stroke to clear the pallet path.
Die-Cast Part Ejector
Mount on a die-cast machine to eject finished parts from the die, where the short ISO 21287 body fits within the tight platen area and the 3769.9 N pull force retracts the ejector pins.
Is the Airtac ACE Compact Cylinder ACE100X150 the Right Cylinder?
For lighter duty applications, the ACE80X150 offers 2513 N push at 0.5 MPa, while stepping up to the ACE125X150 gives you 6135.9 N push at the same pressure. This ACE100X150 sits in the middle of the large-bore range, providing a balance of force and compact size for medium-to-heavy automation.
This model has no magnet fitted, so CMSE or DMSE sensors cannot be mounted without ordering the optional -S code. The 1/4" port and M12x1.75 female rod thread make it compatible with standard fittings and attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X150 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa.
No, this model does not have a magnet. The magnet is an optional -S code addition. Without the -S code, CMSE or DMSE switches cannot be mounted. The fixed TPU bumper only decelerates at the ends and does not hold a load in position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.