Airtac ACE Compact Cylinder ACE100X175B
The AirTAC Airtac ACE Compact Cylinder ACE100X175B is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X175B
This AirTAC ACE100X175B is a double acting ISO 21287 compact cylinder with a 100 mm bore and 175 mm stroke, delivering 3927 N of push force at 0.5 MPa. Its hard-anodized aluminium body and S45C hard-chrome plated rod are built for repetitive automation cycles, while the fixed TPU bumper at each end absorbs impact energy.
Because the ISO 21287 short body is about 50% shorter than an ISO 15552 profile cylinder, this model fits into tight guarding and gantry assemblies where a full-length cylinder would not. For a real-world load estimate, plan for roughly 240 kg of safe vertical work at 0.5 MPa (about 0.6 times the 3927 N rating), which gives you a practical margin for jigs and tooling. The male rod thread (B code) simplifies direct coupling, and the 1/4" port suits standard shop air lines.
Airtac ACE Compact Cylinder ACE100X175B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X175B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X175B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X175B Is Used
Press Fit Station
Use the 3927 N push at 0.5 MPa to press bearing sleeves into aluminum housings on an assembly line, with the 175 mm stroke allowing clearance for part loading and ejection.
Carton Tamping
Mount on a conveyor to tamp and square corrugated cartons before strapping. The compact body fits under existing guard rails, and the fixed TPU bumper prevents product damage at cycle end.
Fixture Clamp
In a CNC machining cell, this cylinder clamps a steel bracket during drilling. The short ISO 21287 body keeps the fixture envelope small, and the male rod thread allows a custom clamp pad to be attached directly.
Is the Airtac ACE Compact Cylinder ACE100X175B the Right Cylinder?
When sizing, compare this 100 mm bore against the 80 mm bore (2513 N push at 0.5 MPa) if you need less force, or step up to the 125 mm bore (6135.9 N push at 0.5 MPa) for heavier loads. The 175 mm stroke is within the 300 mm maximum standard stroke for this bore, so no special order is needed. Since this unit has no optional -S magnet, it cannot accept CMSE or DMSE sensors; order the -S code if you need position sensing. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, all compatible with the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X175B FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
No, this ACE100X175B does not have the optional -S magnet, so CMSE or DMSE switches cannot be mounted. If you need position sensing, you must order the cylinder with the -S code, which adds the magnet. The cylinder itself has a fixed TPU bumper at both ends and operates at 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.