Airtac ACE Compact Cylinder ACE100X225
The AirTAC Airtac ACE Compact Cylinder ACE100X225 is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X225
This AirTAC ACE100X225 is a double acting compact cylinder with a 100 mm bore and 225 mm stroke, delivering 3927 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and the S45C hard-chrome rod resists wear in repetitive cycles.
For real-world sizing, plan for about 240 kg of usable vertical lift at 0.5 MPa (roughly 0.6 times the 3927 N rating, divided by gravity). This model has no magnet fitted, so it cannot accept CMSE or DMSE sensors; order the optional -S code if you need position sensing. With a 1/4" port and PT thread, it suits air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Airtac ACE Compact Cylinder ACE100X225 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X225 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X225
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X225 Is Used
Heavy Clamping Fixture
Use the ACE100X225 to clamp large metal workpieces in a CNC milling fixture. Its 3927 N push at 0.5 MPa holds parts firmly during cutting, and the short body fits under a machine guard where a longer cylinder would not.
Pallet Stops on Conveyor
Mount this cylinder on a conveyor line to raise and lower a pallet stop. The 225 mm stroke clears tall pallets, and the 3769.9 N pull retracts the stop quickly. The fixed TPU bumper reduces shock when the stop hits its end position.
Press Ram for Forming
In a small press brake, this ACE100X225 acts as a forming ram. Its 5497.8 N push at 0.7 MPa bends sheet metal up to 2 mm thick. The compact body allows a low-profile press frame, saving floor space in a fabrication shop.
Is the Airtac ACE Compact Cylinder ACE100X225 the Right Cylinder?
Choose this ACE100X225 when you need a 100 mm bore with a 225 mm stroke and a compact footprint. It produces 3927 N push and 3769.9 N pull at 0.5 MPa, so it handles heavy clamping or pressing tasks. For lighter duty, the ACE63X225 offers 1558.6 N push at 0.5 MPa, while the ACE125X225 steps up to 6135.9 N push. Since this is a double acting cylinder, it does not hold position if air pressure is lost; add a rod lock or pilot check valve for load holding. The optional -S magnet enables CMSE or DMSE switches, and FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, or FTC brackets mount directly to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X225 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), and proof pressure is 1.5 MPa (215 psi).
Yes, this is an ISO 21287 compact cylinder with a hard-anodized aluminium body that is about 50% shorter than an ISO 15552 profile cylinder. It has a fixed TPU bumper at both ends, not an adjustable cushion. This model has no magnet, so it cannot mount CMSE or DMSE sensors; you must order the optional -S code to get the magnet for sensor use.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.