Airtac ACE Compact Cylinder ACE100X225B
The AirTAC Airtac ACE Compact Cylinder ACE100X225B is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X225B
This AirTAC ACE100X225B is a double acting compact cylinder that delivers 3927 N of push force at 0.5 MPa, making it a strong choice for medium-duty automation. Its 100 mm bore and 225 mm stroke fit into tight spaces, as the ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, saving valuable mounting length on your machine.
At 0.7 MPa, the push force rises to 5497.8 N, and the theoretical maximum is 800.9 kgf at 1.0 MPa. For a safe working load, plan for about 2356 N (0.6 times the 0.5 MPa push) to account for friction and dynamic loads. The male rod thread (B code) simplifies attachment, but note this model has no magnet, so CMSE or DMSE sensors cannot be mounted unless you order the optional -S version.
Airtac ACE Compact Cylinder ACE100X225B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X225B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X225B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X225B Is Used
Press Fit Station
Use the 3927 N push at 0.5 MPa to press bushings or bearings into housings on an assembly line, with the compact body fitting under a guard.
Conveyor Stop Gate
Actuate a stop gate on a packaging conveyor, where the 225 mm stroke lifts a barrier to release cartons, and the short body mounts beside the frame.
Clamping Fixture
Clamp sheet metal parts in a welding jig, using the high pull force of 3769.9 N at 0.5 MPa to hold components securely during robotic welding.
Is the Airtac ACE Compact Cylinder ACE100X225B the Right Cylinder?
When sizing, compare this 100 mm bore with the 80 mm bore, which offers 2513.3 N push at 0.5 MPa, or the 125 mm bore with 6135.9 N push. For a 225 mm stroke, this cylinder suits applications needing moderate travel with high force. Since it lacks the optional -S magnet, choose the -S code if you need position sensing via CMSE or DMSE switches. The fixed TPU bumper absorbs end-of-stroke impacts, but it does not hold a load if air pressure is lost; use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X225B FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE100X225B has a hard-anodized aluminium body that is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight jigs and gantries. It uses a fixed TPU bumper at both ends to absorb impact, and the rod is S45C steel with hard-chrome plating. Since this model has no magnet, order the -S code to enable CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X225B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.