Airtac ACE Compact Cylinder ACE100X275
The AirTAC Airtac ACE Compact Cylinder ACE100X275 is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke275 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X275
This AirTAC ACE100X275 is a double acting compact cylinder with a 100 mm bore and 275 mm stroke, delivering 3927 N of push force at 0.5 MPa. Its ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in continuous cycling.
At 0.5 MPa, the pull force is 3769.9 N, and at 0.7 MPa push rises to 5497.8 N with a theoretical maximum of 800.9 kgf at 1.0 MPa. For a real application, plan for about 2356 N of safe working load at 0.5 MPa, which lifts roughly 240 kg vertically with a 2:1 safety margin. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and the 1/4" port suits high-flow actuation.
Airtac ACE Compact Cylinder ACE100X275 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X275 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X275
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X275 Is Used
Press Platen Lift
Use the ACE100X275 to lift a 200 kg press platen in a stamping fixture, leveraging its 3927 N push force at 0.5 MPa and compact body to fit under the bolster plate.
Carton Clamp on Conveyor
Mount this cylinder on a packaging line to clamp cartons against a side rail during labeling, using the 3769.9 N pull stroke to retract the clamp arm quickly.
Die Casting Ejector
In a die casting cell, the ACE100X275 ejects parts from a mold cavity with its 5497.8 N push at 0.7 MPa, while the TPU bumper prevents die damage at high cycle rates.
Is the Airtac ACE Compact Cylinder ACE100X275 the Right Cylinder?
Choose the ACE100X275 when you need a compact cylinder with a 100 mm bore that fits a 275 mm stroke envelope. If you need less force, the ACE80X275 offers 2513.3 N push at 0.5 MPa, while the ACE125X275 provides 6135.9 N push for heavier loads. This model uses a 1/4" port and a female M12x1.75 rod thread, and it accepts FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC mounting brackets. Since this code has no -S suffix, there is no magnet fitted, so CMSE or DMSE sensors cannot be used; order the -S option if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X275 FAQ
At 0.5 MPa, push force is 3927 N and pull is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a proof pressure of 1.5 MPa (215 psi).
Yes, it is an ISO 21287 compact cylinder with a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. However, this model has no magnet because the -S option was not ordered, so CMSE or DMSE switches cannot be mounted. Order the -S code to get the optional magnet for sensor use.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X275
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.