Airtac ACE Compact Cylinder ACE100X300S
The AirTAC Airtac ACE Compact Cylinder ACE100X300S is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 300mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X300S
This AirTAC ACE100X300S is a double acting ISO 21287 compact cylinder delivering a 3927 N push and 3769.9 N pull at 0.5 MPa, with a 5497.8 N push at 0.7 MPa. Its hard-anodized aluminium body and S45C hard-chrome plated rod are built for demanding cycles, and the fixed TPU bumper at both ends absorbs end-of-stroke energy.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight machine frames where a full-length unit will not. The optional -S magnet is fitted on this model, enabling CMSE or DMSE reed and solid-state switches for position sensing. For a 2:1 safety margin, plan to lift about 200 kg vertically at 0.5 MPa, not the full 3927 N rating.
Airtac ACE Compact Cylinder ACE100X300S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X300S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X300S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X300S Is Used
Press Ram
Use in a small stamping press to push 3927 N at 0.5 MPa, driving a die or punch through sheet metal up to 2 mm thick.
Conveyor Stop Gate
Mount as a stop gate on a packaging line, extending to halt cartons weighing up to 200 kg with a 2:1 safety factor at 0.5 MPa.
Clamping Fixture
In a CNC machining center, clamp a heavy workpiece with 3769.9 N pull force, holding it firmly during milling operations.
Is the Airtac ACE Compact Cylinder ACE100X300S the Right Cylinder?
For a 100 mm bore, this 300 mm stroke unit suits heavy pushing and lifting applications. If you need less force, the 80 mm bore offers 2513.3 N push at 0.5 MPa, while stepping up to 125 mm gives 6135.9 N push. The 1/4" port matches standard industrial air lines, and the female M12x1.75 rod thread accepts common attachments.
Since this model carries the -S magnet, you can mount CMSE or DMSE switches directly. For applications requiring position holding when air is lost, add a rod lock or pilot check valve, as the TPU bumper only decelerates and does not lock the load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X300S FAQ
At 0.5 MPa, push is 3927 N and pull is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi).
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight jigs and guards. The fixed TPU bumper absorbs end-of-stroke impact, and the optional -S magnet allows CMSE or DMSE switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.