Airtac ACE Compact Cylinder ACE100X300SB
The AirTAC Airtac ACE Compact Cylinder ACE100X300SB is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 300mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X300SB
This AirTAC ACE100X300SB is a double acting ISO 21287 compact cylinder with a 100 mm bore and a 300 mm stroke, delivering a 3927 N push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, freeing valuable space on automated assembly lines and tight machine frames.
With the optional -S magnet fitted, this model works with CMSE or DMSE reed and solid-state switches for reliable position sensing. For real-world sizing, plan for roughly 240 kg of safe vertical lift at 0.5 MPa (about 60% of the theoretical 3927 N), giving you a practical margin for jigs and fixtures. The fixed TPU bumper absorbs end-of-stroke impact, and the male rod thread (B) simplifies mounting to tooling.
Airtac ACE Compact Cylinder ACE100X300SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X300SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X300SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X300SB Is Used
Automated Assembly Press
Use the 3927 N push at 0.5 MPa to drive a pressing fixture that seats bearings or bushings into housings, with the compact body fitting under a guard where a longer cylinder would not.
Conveyor Stop Gate
Deploy this cylinder to raise a stop gate on a heavy-duty conveyor line, using the 300 mm stroke to clear tall cartons and the magnet to confirm gate position with a CMSE switch.
Machine Guard Lift
Lift a 200 kg safety guard on a packaging machine with a 2:1 margin, relying on the compact body to fit within the machine's frame and the fixed TPU bumper to soften the stop.
Is the Airtac ACE Compact Cylinder ACE100X300SB the Right Cylinder?
Choose this ACE100X300SB when you need a compact, high-force cylinder for a 300 mm stroke in a confined space. If your application requires less force, consider the ACE80X300 with a 2513 N push at 0.5 MPa; for more power, the ACE125X300 offers 6136 N push at the same pressure. The 1/4" port suits standard shop air, and the male rod thread (B) allows direct attachment of clevises or rod eyes.
Since this model includes the -S magnet, you can mount CMSE or DMSE switches for position feedback. Remember, this cylinder is double acting and will drift if air pressure is lost, so for holding a load in place, add a pilot check valve or a rod lock. Mounting options like FA/FB flanges or LB foot brackets bolt directly to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X300SB FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. These values are for a double-acting cylinder with a 100 mm bore.
The ACE100X300SB has a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it ideal for tight spaces. It includes a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet (fitted here) allows CMSE or DMSE switches for position sensing. The hard-anodized aluminium body and S45C hard-chrome rod ensure durability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X300SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.