Airtac ACE Compact Cylinder ACE100X80S
2. Threaded connection between cylinder body and end caps ensures structural integrity and maintenance convenience;
3. Precision-machined bore with hard anodized treatment delivers exceptional wear resistance and durability;
4. Innovative bidirectional asymmetric sealing design on piston enables compact dimensions with integrated oil reservoir functionality;
5. Space-optimized structure reduces installation footprint by up to 50% compared to ISO 15552 standard cylinders of equivalent bore size;
6. Triple sensor grooves on cylinder body facilitate straightforward sensor integration;
7. Integrated cushioning system effectively absorbs residual energy from high-speed operation and mechanical rotation;
8. Comprehensive range of mounting accessories available for flexible configuration.
Category: Compact Cylinders | Brand: Airtac | Series: ACE
AirTAC ACE100X80S Compact Cylinder Specifications
- Model: ACE100X80S
- Type: ISO 6432 standard compact single-acting spring return
- Bore size: 100mm
- Stroke: 80mm (±0.5mm tolerance)
- Operating pressure: 0.1–0.9 MPa
- Cushioning: Elastic buffer + adjustable end caps
- Mounting style: Basic type (MF1) with optional foot/axial mounts
- Port size: PT1/4 (G1/8 optional)
- Temperature range: -20℃ to 80℃
- Body material: High-strength aluminum alloy (anodized)
- Seal material: NBR (nitrile rubber)
- Weight: 3.2kg (without accessories)
- Dimensions: 200mm(L) × 100mm(W) × 100mm(H) (at full extension)
- Piston speed: 50–700mm/s (lubricated operation)
- Protection rating: IP54 (standard)
A space-saving pneumatic cylinder combining ISO standardization with enhanced rigidity. Features dual-purpose cushioning system and anti-rotation piston design for precise linear motion. The reduced flange-to-tube ratio (12% smaller than conventional models) enables installation in confined spaces while maintaining 20% higher lateral load capacity than similar compact cylinders.
- High-density automation equipment tool changers
- Vertical packaging machine clamping mechanisms
- PCB handling robots in electronics assembly
- Pharmaceutical blister packaging systems
- Automotive parts positioning fixtures
Installation tip:
Maintain 0.5mm minimum clearance between rod end and load during alignment.
For vertical mounting, use auxiliary guide mechanisms when handling loads exceeding 15kg.
Lubricate with ISO VG32 hydraulic oil if operating below -10℃.
Critical note:
Avoid side load forces exceeding 50N. Maximum permissible angular misalignment: ±3°.
Cycle rate should not exceed 85% of calculated maximum (based on Cv value 1.8).
| Property | Property Value |
|---|---|
| sku | ACE100X80S |
| Mounting Type | Without Mounting Accessories |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20°C to 70°C Speed Range: 30 to 500 mm/s |
| Port Size | G1/8 |
| Piston Rod Thread Type | Internal Thread |
| Magnet | S-Magnetic |
| Bore Diameter | 100mm |
| Stroke | 80 mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.