Airtac ACE Compact Cylinder ACE25X10SB
The AirTAC Airtac ACE Compact Cylinder ACE25X10SB is a genuine double acting ISO 21287 compact air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE25X10SB
This AirTAC ACE25X10SB is a double acting compact cylinder that extends and retracts its 10 mm stroke with air pressure on both sides. It delivers a 245.4 N push and 206.2 N pull at 0.5 MPa, so it suits light clamping and indexing tasks in tight spaces.
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, which frees up room in compact jigs and guards. The optional -S magnet is fitted here, so CMSE or DMSE switches can be mounted for position sensing. For a safe working load, plan on about 147 N of real work at 0.5 MPa rather than the full rating.
Airtac ACE Compact Cylinder ACE25X10SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE25X10SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE25X10SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE25X10SB Is Used
Fixture Clamping
Use in a small CNC fixture to clamp thin aluminum parts with about 147 N of reliable force, fitting into a tight machine envelope.
Parts Ejection
Mount on a conveyor guide to eject small plastic components from a sensor station, using the 206.2 N pull stroke for controlled removal.
Light Press
Drive a small manual press for staking or crimping electronic connectors, taking advantage of the 10 mm stroke and 245.4 N push force.
Is the Airtac ACE Compact Cylinder ACE25X10SB the Right Cylinder?
For a lighter duty, the ACE20X10 offers 157.1 N push, while the ACE32X10 steps up to 402.1 N push at 0.5 MPa. This 25 mm bore version balances force and footprint for small automated stations. The male rod thread (B) simplifies mounting with rod-end accessories, and the M5x0.8 port keeps plumbing compact. Remember, this cylinder does not hold its position when air is removed, so add a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE25X10SB FAQ
At 0.5 MPa, push is 245.4 N and pull is 206.2 N. At 0.7 MPa, push rises to 343.6 N and pull to 288.6 N. The theoretical maximum force is 50.1 kgf at 1.0 MPa.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight jigs and guards. The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the optional -S magnet allows CMSE or DMSE switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE25X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.