Airtac ACE Compact Cylinder ACE32X10H
The AirTAC Airtac ACE Compact Cylinder ACE32X10H is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X10H
This AirTAC ACE32X10H is a double acting compact cylinder built to ISO 21287, with a 32 mm bore and 10 mm stroke. It delivers 402.1 N of push force at 0.5 MPa, so it suits light clamping and indexing tasks in tight automated cells.
Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which lets you fit it behind guards or inside compact jigs. The hard-anodized aluminium body and hard-chrome plated S45C rod resist wear, while the fixed TPU bumper at each end absorbs impact. For a safe working load, plan around 241 N (about 24.6 kg) at 0.5 MPa, not the full rating, to allow for friction and side loads. This model has no magnet, so no sensor can be mounted unless you order the optional -S version.
Airtac ACE Compact Cylinder ACE32X10H Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X10H |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X10H
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X10H Is Used
Precision Clamping Jig
Use in a CNC fixture to clamp small parts with a 10 mm stroke, delivering 402.1 N of force at 0.5 MPa to hold components securely during drilling or milling.
Conveyor Stop Gate
Mount on a packaging line to raise a stop pin that halts lightweight boxes on a conveyor. The short stroke and compact body fit between rails, and the TPU bumper reduces noise at each cycle.
Automated Assembly Pusher
In an electronics assembly station, push a small bracket into place with a 10 mm stroke. The 345.6 N pull force retracts the rod quickly, and the ISO 21287 face accepts standard mounting brackets.
Is the Airtac ACE Compact Cylinder ACE32X10H the Right Cylinder?
For a 32 mm bore, the ACE32X10H provides a compact stroke of 10 mm, ideal for short push or pull actions. If you need more force, consider the 40 mm bore which pushes 628.3 N at 0.5 MPa, or step down to the 25 mm bore at 245.4 N for lighter duty. Since this cylinder is double acting, it extends and retracts with air, but it will not hold a position when air pressure is lost; use a rod lock or pilot check valve for load holding. The 1/8" port suits standard fittings, and you can choose FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, or FTC mounts to match your fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X10H FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force at 1.0 MPa is 82 kgf. These are based on the 32 mm bore and 12 mm rod.
The ACE is an ISO 21287 compact cylinder, so its body is about 50% shorter than an ISO 15552 profile cylinder, saving space in tight fixtures. It has a fixed TPU bumper at both ends to absorb impact. This model does not include a magnet, so you cannot mount CMSE or DMSE switches unless you order the optional -S version, which adds the magnet for sensor detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X10H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.